Cucumber Reports (no 4635) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4635	24 Jan 2024, 23:52

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:5.677	Passed

Tags: @product @not_release_blocker

35.773

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.830

And I temporarily create a 4 GiB disk named "gptfat" 0.031

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.982

And I plug USB drive "gptfat" 2.404

When I start Tails Installer 21.470

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 0.955

After features/support/hooks.rb:75 0.001

Tags: @product

32.846

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.726

And I temporarily create a 7200 MiB disk named "temp" 0.021

And I start Tails Installer 22.032

But a suitable USB device is not found 0.029

When I plug USB drive "temp" 2.715

Then the "temp" USB drive is selected 0.090

When I unplug USB drive "temp" 0.211

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:291 0.708

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.737

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.898

And I temporarily create a 7200 MiB disk named "install" 0.083

And I create a gpt partition with a vfat filesystem on disk "install" 4.048

And I plug USB drive "install" 2.512

And I install Tails to USB drive "install" by cloning 3:28.524

Then the running Tails is installed on USB drive "install" 10.602

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.083

After features/support/hooks.rb:75 0.102

Tags: @product

3:49.336

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.831

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.399

And I install Tails to USB drive "install" by cloning 3:28.388

Then the running Tails is installed on USB drive "install" 10.603

But there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.069

After features/support/hooks.rb:75 0.109

Tags: @product

4:16.313

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.825

And I create a file in the Persistent directory 0.083

And I temporarily create a 7200 MiB disk named "install" 0.025

And I create a gpt partition with a vfat filesystem on disk "install" 4.056

And I plug USB drive "install" 2.415

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.960

Then the running Tails is installed on USB drive "install" 14.377

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 4.500

Hooks

After features/support/hooks.rb:291 2.209

After features/support/hooks.rb:75 0.113

Tags: @product

3:56.958

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.114

And I temporarily create a 7200 MiB disk named "install" 0.027

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:30.326

Then the running Tails is installed on USB drive "install" 13.946

And there is no persistence partition on USB drive "install" 0.096

Hooks

After features/support/hooks.rb:291 1.594

After features/support/hooks.rb:75 0.089

Tags: @product

4:48.140

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.021

And I have started Tails from DVD without network and logged in 8.236

And I clone USB drive "__internal" to a temporary USB drive "install" 1.154

And I plug USB drive "install" 2.498

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 4:8.923

Then the running Tails is installed on USB drive "install" 18.216

And there is no persistence partition on USB drive "install" 0.089

Hooks

After features/support/hooks.rb:291 1.130

After features/support/hooks.rb:75 0.124

Tags: @product @uefi

2:44.597

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 1:22.119

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.988

Then Tails is running from USB drive "__internal" 0.406

And the boot device has safe access rights 3.655

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.695

After features/support/hooks.rb:75 0.014

Tags: @product

2:16.361

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.288

And I plug and mount a USB drive containing a Tails USB image 46.037

And I create a 7200 MiB disk named "usbimage" 0.053

And I plug USB drive "usbimage" 2.449

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:19.532

Hooks

After features/support/hooks.rb:291 2.706

After features/support/hooks.rb:75 0.085

Tags: @product

1:11.611

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.268

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:10.242

Then Tails is running from USB drive "usbimage" 0.331

And the label of the system partition on "usbimage" is "Tails" 0.193

And the system partition on "usbimage" is an EFI system partition 0.134

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.145

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.118

And the system partition on "usbimage" has the expected flags 0.091

Hooks

After features/support/hooks.rb:291 0.746

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:5.677	Passed

Feature Report