Cucumber Reports (no 4636) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4636	25 Jan 2024, 15:05

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:32.566	Passed

Tags: @product @not_release_blocker

37.897

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.020

And I temporarily create a 4 GiB disk named "gptfat" 0.069

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.994

And I plug USB drive "gptfat" 2.438

When I start Tails Installer 22.332

Then I am told by Tails Installer that the destination device "is too small" 0.042

Hooks

After features/support/hooks.rb:291 0.939

After features/support/hooks.rb:75 0.000

Tags: @product

33.684

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.333

And I temporarily create a 7200 MiB disk named "temp" 0.053

And I start Tails Installer 22.264

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.720

Then the "temp" USB drive is selected 0.087

When I unplug USB drive "temp" 0.185

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:291 0.679

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.131

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.671

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 5.109

And I plug USB drive "install" 2.460

And I install Tails to USB drive "install" by cloning 3:29.286

Then the running Tails is installed on USB drive "install" 11.482

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.291

After features/support/hooks.rb:75 0.109

Tags: @product

3:54.001

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.451

And I temporarily create a 7200 MiB disk named "install" 0.054

And I plug USB drive "install" 2.472

And I install Tails to USB drive "install" by cloning 3:29.699

Then the running Tails is installed on USB drive "install" 13.233

But there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:291 1.612

After features/support/hooks.rb:75 0.126

Tags: @product

4:19.214

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.593

And I create a file in the Persistent directory 0.092

And I temporarily create a 7200 MiB disk named "install" 0.073

And I create a gpt partition with a vfat filesystem on disk "install" 4.244

And I plug USB drive "install" 2.558

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:44.165

Then the running Tails is installed on USB drive "install" 12.879

And there is a persistence partition on USB drive "install" 0.074

And the USB drive "install" contains the same files as my persistent storage 3.532

Hooks

After features/support/hooks.rb:291 1.969

After features/support/hooks.rb:75 0.129

Tags: @product

3:55.174

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.256

And I temporarily create a 7200 MiB disk named "install" 0.075

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:28.654

Then the running Tails is installed on USB drive "install" 13.656

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 2.436

After features/support/hooks.rb:75 0.101

Tags: @product

4:7.350

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.369

And I have started Tails from DVD without network and logged in 9.056

And I clone USB drive "__internal" to a temporary USB drive "install" 1.209

And I plug USB drive "install" 2.505

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:33.360

Then the running Tails is installed on USB drive "install" 11.757

And there is no persistence partition on USB drive "install" 0.091

Hooks

After features/support/hooks.rb:291 1.151

After features/support/hooks.rb:75 0.138

Tags: @product @uefi

1:34.647

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.701

And I power off the computer 0.335

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.898

Then Tails is running from USB drive "__internal" 0.324

And the boot device has safe access rights 3.294

And Tails has started in UEFI mode 0.069

Hooks

After features/support/hooks.rb:291 0.633

After features/support/hooks.rb:75 0.005

Tags: @product

2:21.331

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 21.089

And I plug and mount a USB drive containing a Tails USB image 47.590

And I create a 7200 MiB disk named "usbimage" 0.052

And I plug USB drive "usbimage" 2.483

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:10.115

Hooks

After features/support/hooks.rb:291 1.742

After features/support/hooks.rb:75 0.111

Tags: @product

1:12.133

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.190

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:10.472

Then Tails is running from USB drive "usbimage" 0.435

And the label of the system partition on "usbimage" is "Tails" 0.252

And the system partition on "usbimage" is an EFI system partition 0.276

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.146

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.131

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.137

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:291 0.637

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:32.566	Passed

Feature Report