Cucumber Reports (no 4642) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4642	28 Jan 2024, 12:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:49.418	Passed

Tags: @product @not_release_blocker

38.238

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.606

And I temporarily create a 4 GiB disk named "gptfat" 0.035

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.955

And I plug USB drive "gptfat" 2.424

When I start Tails Installer 24.143

Then I am told by Tails Installer that the destination device "is too small" 0.074

Hooks

After features/support/hooks.rb:291 0.902

After features/support/hooks.rb:75 0.001

Tags: @product

32.460

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.556

And I temporarily create a 7200 MiB disk named "temp" 0.025

And I start Tails Installer 21.884

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.690

Then the "temp" USB drive is selected 0.086

When I unplug USB drive "temp" 0.178

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.694

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.496

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.603

And I temporarily create a 7200 MiB disk named "install" 0.027

And I create a gpt partition with a vfat filesystem on disk "install" 4.026

And I plug USB drive "install" 2.399

And I install Tails to USB drive "install" by cloning 3:28.097

Then the running Tails is installed on USB drive "install" 12.273

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.114

After features/support/hooks.rb:75 0.103

Tags: @product

3:50.311

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.469

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.454

And I install Tails to USB drive "install" by cloning 3:29.341

Then the running Tails is installed on USB drive "install" 10.941

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.122

After features/support/hooks.rb:75 0.104

Tags: @product

4:11.889

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.710

And I create a file in the Persistent directory 0.077

And I temporarily create a 7200 MiB disk named "install" 0.026

And I create a gpt partition with a vfat filesystem on disk "install" 3.983

And I plug USB drive "install" 2.421

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:37.404

Then the running Tails is installed on USB drive "install" 13.459

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 3.738

Hooks

After features/support/hooks.rb:291 1.456

After features/support/hooks.rb:75 0.134

Tags: @product

3:54.686

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.652

And I temporarily create a 7200 MiB disk named "install" 0.023

And I plug USB drive "install" 2.400

And I install Tails to USB drive "install" by cloning 3:28.742

Then the running Tails is installed on USB drive "install" 12.767

And there is no persistence partition on USB drive "install" 0.100

Hooks

After features/support/hooks.rb:291 1.767

After features/support/hooks.rb:75 0.095

Tags: @product

4:1.208

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.034

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.711

And I have started Tails from DVD without network and logged in 8.242

And I clone USB drive "__internal" to a temporary USB drive "install" 0.982

And I plug USB drive "install" 2.424

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:27.457

Then the running Tails is installed on USB drive "install" 12.312

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 0.960

After features/support/hooks.rb:75 0.071

Tags: @product @uefi

1:26.189

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.210

And I power off the computer 0.317

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:11.839

Then Tails is running from USB drive "__internal" 0.427

And the boot device has safe access rights 3.318

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:291 0.641

After features/support/hooks.rb:75 0.069

Tags: @product

1:14.129

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.006

Steps

Given I have started Tails from DVD without network and logged in 7.591

And I plug and mount a USB drive containing a Tails USB image 25.962

And I create a 7200 MiB disk named "usbimage" 0.022

And I plug USB drive "usbimage" 2.426

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 38.125

Hooks

After features/support/hooks.rb:291 1.244

After features/support/hooks.rb:75 0.089

Tags: @product

1:5.808

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.108

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:4.135

Then Tails is running from USB drive "usbimage" 0.400

And the label of the system partition on "usbimage" is "Tails" 0.229

And the system partition on "usbimage" is an EFI system partition 0.336

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.150

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.138

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.131

And the system partition on "usbimage" has the expected flags 0.179

Hooks

After features/support/hooks.rb:291 0.636

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:49.418	Passed

Feature Report