Cucumber Reports (no 4656) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4656	08 Feb 2024, 13:03

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.043	Passed

Tags: @product @not_release_blocker

38.422

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.622

And I temporarily create a 4 GiB disk named "gptfat" 0.051

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.027

And I plug USB drive "gptfat" 2.448

When I start Tails Installer 22.224

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 0.926

After features/support/hooks.rb:75 0.001

Tags: @product

34.274

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.359

And I temporarily create a 7200 MiB disk named "temp" 0.047

And I start Tails Installer 22.846

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.691

Then the "temp" USB drive is selected 0.102

When I unplug USB drive "temp" 0.176

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.670

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.257

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.723

And I temporarily create a 7200 MiB disk named "install" 0.595

And I create a gpt partition with a vfat filesystem on disk "install" 4.103

And I plug USB drive "install" 2.414

And I install Tails to USB drive "install" by cloning 3:29.434

Then the running Tails is installed on USB drive "install" 11.921

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.056

After features/support/hooks.rb:75 0.109

Tags: @product

3:52.328

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.930

And I temporarily create a 7200 MiB disk named "install" 0.255

And I plug USB drive "install" 2.493

And I install Tails to USB drive "install" by cloning 3:28.437

Then the running Tails is installed on USB drive "install" 11.122

But there is no persistence partition on USB drive "install" 0.089

Hooks

After features/support/hooks.rb:291 1.086

After features/support/hooks.rb:75 0.105

Tags: @product

4:28.342

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.628

And I create a file in the Persistent directory 0.114

And I temporarily create a 7200 MiB disk named "install" 0.063

And I create a gpt partition with a vfat filesystem on disk "install" 4.063

And I plug USB drive "install" 2.458

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.964

Then the running Tails is installed on USB drive "install" 13.190

And there is a persistence partition on USB drive "install" 0.113

And the USB drive "install" contains the same files as my persistent storage 3.744

Hooks

After features/support/hooks.rb:291 1.782

After features/support/hooks.rb:75 0.113

Tags: @product

4:1.210

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.877

And I temporarily create a 7200 MiB disk named "install" 0.060

And I plug USB drive "install" 2.454

And I install Tails to USB drive "install" by cloning 3:32.023

Then the running Tails is installed on USB drive "install" 14.705

And there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:291 1.422

After features/support/hooks.rb:75 0.086

Tags: @product

4:0.675

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.260

And I have started Tails from DVD without network and logged in 8.777

And I clone USB drive "__internal" to a temporary USB drive "install" 1.345

And I plug USB drive "install" 2.416

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.135

Then the running Tails is installed on USB drive "install" 10.652

And there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:291 1.074

After features/support/hooks.rb:75 0.121

Tags: @product @uefi

1:47.259

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.722

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.094

When I start Tails from USB drive "__internal" with network unplugged and I login 1:31.987

Then Tails is running from USB drive "__internal" 0.396

And the boot device has safe access rights 3.642

And Tails has started in UEFI mode 0.097

Hooks

After features/support/hooks.rb:291 0.629

After features/support/hooks.rb:75 0.007

Tags: @product

1:30.559

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.294

And I plug and mount a USB drive containing a Tails USB image 29.205

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.396

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 50.616

Hooks

After features/support/hooks.rb:291 1.428

After features/support/hooks.rb:75 0.087

Tags: @product

1:6.713

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.156

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.369

Then Tails is running from USB drive "usbimage" 0.384

And the label of the system partition on "usbimage" is "Tails" 0.183

And the system partition on "usbimage" is an EFI system partition 0.152

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.157

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.129

And the system partition on "usbimage" has the expected flags 0.093

Hooks

After features/support/hooks.rb:291 0.725

After features/support/hooks.rb:75 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.043	Passed

Feature Report