Cucumber Reports (no 4657) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4657	08 Feb 2024, 19:02

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:56.826	Passed

Tags: @product @not_release_blocker

36.674

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.910

And I temporarily create a 4 GiB disk named "gptfat" 0.031

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.159

And I plug USB drive "gptfat" 2.415

When I start Tails Installer 22.101

Then I am told by Tails Installer that the destination device "is too small" 0.055

Hooks

After features/support/hooks.rb:291 0.958

After features/support/hooks.rb:75 0.001

Tags: @product

34.340

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.578

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 22.680

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.688

Then the "temp" USB drive is selected 0.116

When I unplug USB drive "temp" 0.186

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.653

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.309

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.421

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 4.070

And I plug USB drive "install" 2.420

And I install Tails to USB drive "install" by cloning 3:28.457

Then the running Tails is installed on USB drive "install" 10.791

But there is no persistence partition on USB drive "install" 0.091

Hooks

After features/support/hooks.rb:291 0.893

After features/support/hooks.rb:75 0.113

Tags: @product

3:53.571

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.170

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.436

And I install Tails to USB drive "install" by cloning 3:30.758

Then the running Tails is installed on USB drive "install" 12.060

But there is no persistence partition on USB drive "install" 0.090

Hooks

After features/support/hooks.rb:291 1.040

After features/support/hooks.rb:75 0.129

Tags: @product

4:27.086

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.767

And I create a file in the Persistent directory 0.146

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 4.145

And I plug USB drive "install" 2.452

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.543

Then the running Tails is installed on USB drive "install" 14.850

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 3.062

Hooks

After features/support/hooks.rb:291 2.207

After features/support/hooks.rb:75 0.120

Tags: @product

3:58.658

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.177

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.462

And I install Tails to USB drive "install" by cloning 3:29.582

Then the running Tails is installed on USB drive "install" 15.317

And there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.521

After features/support/hooks.rb:75 0.088

Tags: @product

4:3.421

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.299

And I have started Tails from DVD without network and logged in 8.722

And I clone USB drive "__internal" to a temporary USB drive "install" 0.960

And I plug USB drive "install" 2.384

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:30.893

Then the running Tails is installed on USB drive "install" 11.088

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.003

After features/support/hooks.rb:75 0.113

Tags: @product @uefi

1:32.651

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.555

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.044

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.587

Then Tails is running from USB drive "__internal" 0.455

And the boot device has safe access rights 3.618

And Tails has started in UEFI mode 0.059

Hooks

After features/support/hooks.rb:291 0.598

After features/support/hooks.rb:75 0.006

Tags: @product

1:47.414

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.047

And I plug and mount a USB drive containing a Tails USB image 28.694

And I create a 7200 MiB disk named "usbimage" 0.044

And I plug USB drive "usbimage" 2.467

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:8.160

Hooks

After features/support/hooks.rb:291 2.847

After features/support/hooks.rb:75 0.084

Tags: @product

1:8.698

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.151

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:7.069

Then Tails is running from USB drive "usbimage" 0.479

And the label of the system partition on "usbimage" is "Tails" 0.286

And the system partition on "usbimage" is an EFI system partition 0.201

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.209

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.145

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.086

And the system partition on "usbimage" has the expected flags 0.068

Hooks

After features/support/hooks.rb:291 0.680

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:56.826	Passed

Feature Report