Cucumber Reports (no 4658) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4658	09 Feb 2024, 15:42

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:8.085	Passed

Tags: @product @not_release_blocker

36.743

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.827

And I temporarily create a 4 GiB disk named "gptfat" 0.068

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.082

And I plug USB drive "gptfat" 2.435

When I start Tails Installer 22.274

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.230

After features/support/hooks.rb:75 0.001

Tags: @product

33.838

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.458

And I temporarily create a 7200 MiB disk named "temp" 0.032

And I start Tails Installer 22.235

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.793

Then the "temp" USB drive is selected 0.090

When I unplug USB drive "temp" 0.186

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.655

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.949

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.341

And I temporarily create a 7200 MiB disk named "install" 0.035

And I create a gpt partition with a vfat filesystem on disk "install" 4.056

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:30.021

Then the running Tails is installed on USB drive "install" 10.982

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.182

After features/support/hooks.rb:75 0.105

Tags: @product

3:51.434

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.698

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.480

And I install Tails to USB drive "install" by cloning 3:29.483

Then the running Tails is installed on USB drive "install" 11.653

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.160

After features/support/hooks.rb:75 0.104

Tags: @product

4:29.007

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.341

And I create a file in the Persistent directory 0.088

And I temporarily create a 7200 MiB disk named "install" 0.068

And I create a gpt partition with a vfat filesystem on disk "install" 5.097

And I plug USB drive "install" 2.463

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.624

Then the running Tails is installed on USB drive "install" 14.039

And there is a persistence partition on USB drive "install" 0.069

And the USB drive "install" contains the same files as my persistent storage 3.215

Hooks

After features/support/hooks.rb:291 1.946

After features/support/hooks.rb:75 0.125

Tags: @product

4:3.140

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.867

And I temporarily create a 7200 MiB disk named "install" 0.060

And I plug USB drive "install" 2.495

And I install Tails to USB drive "install" by cloning 3:32.658

Then the running Tails is installed on USB drive "install" 16.970

And there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.345

After features/support/hooks.rb:75 0.093

Tags: @product

4:1.818

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.496

And I have started Tails from DVD without network and logged in 8.668

And I clone USB drive "__internal" to a temporary USB drive "install" 1.080

And I plug USB drive "install" 2.441

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.846

Then the running Tails is installed on USB drive "install" 11.208

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.204

After features/support/hooks.rb:75 0.119

Tags: @product @uefi

1:36.657

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.062

And I power off the computer 0.343

And the computer is set to boot in UEFI mode 0.054

When I start Tails from USB drive "__internal" with network unplugged and I login 1:19.296

Then Tails is running from USB drive "__internal" 0.506

And the boot device has safe access rights 3.329

And Tails has started in UEFI mode 0.064

Hooks

After features/support/hooks.rb:291 0.639

After features/support/hooks.rb:75 0.006

Tags: @product

1:48.262

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.290

And I plug and mount a USB drive containing a Tails USB image 31.218

And I create a 7200 MiB disk named "usbimage" 0.040

And I plug USB drive "usbimage" 2.465

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:6.247

Hooks

After features/support/hooks.rb:291 1.635

After features/support/hooks.rb:75 0.084

Tags: @product

1:11.233

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.173

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.770

Then Tails is running from USB drive "usbimage" 0.351

And the label of the system partition on "usbimage" is "Tails" 0.195

And the system partition on "usbimage" is an EFI system partition 0.192

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.161

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.139

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.122

And the system partition on "usbimage" has the expected flags 0.126

Hooks

After features/support/hooks.rb:291 0.632

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:8.085	Passed

Feature Report