Cucumber Reports (no 4661) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4661	11 Feb 2024, 15:03

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:25.879	Passed

Tags: @product @not_release_blocker

39.751

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.737

And I temporarily create a 4 GiB disk named "gptfat" 0.027

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.968

And I plug USB drive "gptfat" 2.415

When I start Tails Installer 24.553

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:291 0.979

After features/support/hooks.rb:75 0.001

Tags: @product

33.038

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.895

And I temporarily create a 7200 MiB disk named "temp" 0.025

And I start Tails Installer 22.151

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.629

Then the "temp" USB drive is selected 0.088

When I unplug USB drive "temp" 0.206

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 0.645

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.170

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.673

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 5.151

And I plug USB drive "install" 2.494

And I install Tails to USB drive "install" by cloning 3:29.182

Then the running Tails is installed on USB drive "install" 11.546

But there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:291 0.997

After features/support/hooks.rb:75 0.105

Tags: @product

3:48.619

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.822

And I temporarily create a 7200 MiB disk named "install" 0.035

And I plug USB drive "install" 2.569

And I install Tails to USB drive "install" by cloning 3:28.736

Then the running Tails is installed on USB drive "install" 9.393

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.037

After features/support/hooks.rb:75 0.105

Tags: @product

4:25.331

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.420

And I create a file in the Persistent directory 0.069

And I temporarily create a 7200 MiB disk named "install" 0.034

And I create a gpt partition with a vfat filesystem on disk "install" 4.192

And I plug USB drive "install" 2.437

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.350

Then the running Tails is installed on USB drive "install" 12.383

And there is a persistence partition on USB drive "install" 0.079

And the USB drive "install" contains the same files as my persistent storage 3.363

Hooks

After features/support/hooks.rb:291 2.330

After features/support/hooks.rb:75 0.114

Tags: @product

3:59.366

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.108

And I temporarily create a 7200 MiB disk named "install" 0.032

And I plug USB drive "install" 2.477

And I install Tails to USB drive "install" by cloning 3:30.301

Then the running Tails is installed on USB drive "install" 15.349

And there is no persistence partition on USB drive "install" 0.097

Hooks

After features/support/hooks.rb:291 1.447

After features/support/hooks.rb:75 0.091

Tags: @product

4:2.697

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.454

And I have started Tails from DVD without network and logged in 8.816

And I clone USB drive "__internal" to a temporary USB drive "install" 1.128

And I plug USB drive "install" 2.413

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.278

Then the running Tails is installed on USB drive "install" 11.551

And there is no persistence partition on USB drive "install" 0.054

Hooks

After features/support/hooks.rb:291 1.187

After features/support/hooks.rb:75 0.119

Tags: @product @uefi

1:32.024

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.375

And I power off the computer 0.336

And the computer is set to boot in UEFI mode 0.046

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.181

Then Tails is running from USB drive "__internal" 0.476

And the boot device has safe access rights 3.550

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.635

After features/support/hooks.rb:75 0.006

Tags: @product

1:18.375

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.902

And I plug and mount a USB drive containing a Tails USB image 28.456

And I create a 7200 MiB disk named "usbimage" 0.024

And I plug USB drive "usbimage" 2.431

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 39.560

Hooks

After features/support/hooks.rb:291 1.473

After features/support/hooks.rb:75 0.083

Tags: @product

1:10.503

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.122

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.114

Then Tails is running from USB drive "usbimage" 0.397

And the label of the system partition on "usbimage" is "Tails" 0.210

And the system partition on "usbimage" is an EFI system partition 0.127

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.205

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.122

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.105

And the system partition on "usbimage" has the expected flags 0.099

Hooks

After features/support/hooks.rb:291 0.737

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:25.879	Passed

Feature Report