Cucumber Reports (no 4663) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4663	13 Feb 2024, 17:32

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:32.835	Passed

Tags: @product @not_release_blocker

36.449

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.037

And I temporarily create a 4 GiB disk named "gptfat" 0.030

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.982

And I plug USB drive "gptfat" 2.419

When I start Tails Installer 21.932

Then I am told by Tails Installer that the destination device "is too small" 0.048

Hooks

After features/support/hooks.rb:291 0.918

After features/support/hooks.rb:75 0.001

Tags: @product

33.199

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.086

And I temporarily create a 7200 MiB disk named "temp" 0.035

And I start Tails Installer 22.042

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.702

Then the "temp" USB drive is selected 0.098

When I unplug USB drive "temp" 0.187

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.706

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.901

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.977

And I temporarily create a 7200 MiB disk named "install" 0.029

And I create a gpt partition with a vfat filesystem on disk "install" 3.994

And I plug USB drive "install" 2.459

And I install Tails to USB drive "install" by cloning 3:27.950

Then the running Tails is installed on USB drive "install" 10.415

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.141

After features/support/hooks.rb:75 0.104

Tags: @product

3:51.715

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.105

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.426

And I install Tails to USB drive "install" by cloning 3:30.136

Then the running Tails is installed on USB drive "install" 9.923

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.166

After features/support/hooks.rb:75 0.105

Tags: @product

4:52.273

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.820

And I create a file in the Persistent directory 0.079

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 4.039

And I plug USB drive "install" 2.522

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:15.283

Then the running Tails is installed on USB drive "install" 14.680

And there is a persistence partition on USB drive "install" 0.092

And the USB drive "install" contains the same files as my persistent storage 3.717

Hooks

After features/support/hooks.rb:291 1.757

After features/support/hooks.rb:75 0.122

Tags: @product

4:36.792

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 37.757

And I temporarily create a 7200 MiB disk named "install" 0.517

And I plug USB drive "install" 2.407

And I install Tails to USB drive "install" by cloning 3:29.127

Then the running Tails is installed on USB drive "install" 26.903

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.554

After features/support/hooks.rb:75 0.102

Tags: @product

4:26.597

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.686

And I have started Tails from DVD without network and logged in 9.089

And I clone USB drive "__internal" to a temporary USB drive "install" 1.122

And I plug USB drive "install" 2.536

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:51.329

Then the running Tails is installed on USB drive "install" 11.747

And there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:291 1.096

After features/support/hooks.rb:75 0.118

Tags: @product @uefi

1:42.828

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.521

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.022

When I start Tails from USB drive "__internal" with network unplugged and I login 1:26.221

Then Tails is running from USB drive "__internal" 0.380

And the boot device has safe access rights 4.287

And Tails has started in UEFI mode 0.066

Hooks

After features/support/hooks.rb:291 0.817

After features/support/hooks.rb:75 0.008

Tags: @product

2:47.158

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.573

And I plug and mount a USB drive containing a Tails USB image 43.668

And I create a 7200 MiB disk named "usbimage" 0.027

And I plug USB drive "usbimage" 2.479

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:51.409

Hooks

After features/support/hooks.rb:291 3.072

After features/support/hooks.rb:75 0.084

Tags: @product

1:12.919

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.172

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:11.389

Then Tails is running from USB drive "usbimage" 0.493

And the label of the system partition on "usbimage" is "Tails" 0.214

And the system partition on "usbimage" is an EFI system partition 0.198

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.144

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.107

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.120

Hooks

After features/support/hooks.rb:291 0.664

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:32.835	Passed

Feature Report