Project Number Date
test_Tails_ISO_stable 4671 17 Feb 2024, 11:59

Failures Overview

The following summary displays scenarios that failed.

Feature: Installing Tails to a USB drive
Tags: @product @not_release_blocker
44.316
Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition
Before features/support/hooks.rb:245 0.002
Steps
Given I have started Tails from DVD without network and logged in 8.969
And I temporarily create a 4 GiB disk named "gptfat" 0.052
And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.303
And I plug USB drive "gptfat" 2.468
When I start Tails Installer 27.523
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
features/usb_install.feature:12:in `When I start Tails Installer'
Then I am told by Tails Installer that the destination device "is too small" 0.000
After features/support/hooks.rb:291 4.262 
SCENARIO FAILED: 'Try installing Tails to a too small USB drive with GPT and a FAT partition' (at time 00:38:01)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:01_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:01_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:01_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:01_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.journal
After features/support/hooks.rb:75 0.001
Feature: Installing Tails to a USB drive
Tags: @product
36.884
Scenario Detecting when a target USB drive is inserted or removed
Before features/support/hooks.rb:245 0.003
Steps
Given I have started Tails from DVD without network and logged in 9.179
And I temporarily create a 7200 MiB disk named "temp" 0.051
And I start Tails Installer 27.652
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
features/usb_install.feature:18:in `And I start Tails Installer'
But a suitable USB device is not found 0.000
When I plug USB drive "temp" 0.000
Then the "temp" USB drive is selected 0.000
When I unplug USB drive "temp" 0.000
Then a suitable USB device is not found 0.000
After features/support/hooks.rb:291 4.181 
SCENARIO FAILED: 'Detecting when a target USB drive is inserted or removed' (at time 00:38:42)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:42_Detecting_when_a_target_USB_drive_is_inserted_or_removed.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:42_Detecting_when_a_target_USB_drive_is_inserted_or_removed.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:42_Detecting_when_a_target_USB_drive_is_inserted_or_removed.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:38:42_Detecting_when_a_target_USB_drive_is_inserted_or_removed.journal
After features/support/hooks.rb:75 0.000
Feature: Installing Tails to a USB drive
Tags: @product
43.556
Scenario Installing Tails with Tails Installer to a used USB drive
Before features/support/hooks.rb:245 0.002
Steps
Given I have started Tails from DVD without network and logged in 8.336
And I temporarily create a 7200 MiB disk named "install" 0.050
And I create a gpt partition with a vfat filesystem on disk "install" 5.095
And I plug USB drive "install" 2.416
And I install Tails to USB drive "install" by cloning 27.657
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:30:in `And I install Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
But there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:291 4.180 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive' (at time 00:39:30)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:39:30_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:39:30_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:39:30_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:39:30_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.journal
After features/support/hooks.rb:75 0.002
Feature: Installing Tails to a USB drive
Tags: @product
39.901
Scenario Installing Tails with Tails Installer to a pristine USB drive
Before features/support/hooks.rb:245 0.003
Steps
Given I have started Tails from DVD without network and logged in 7.840
And I temporarily create a 7200 MiB disk named "install" 0.050
And I plug USB drive "install" 4.121
And I install Tails to USB drive "install" by cloning 27.889
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:38:in `And I install Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
But there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:291 4.255 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive' (at time 00:40:14)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:40:14_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:40:14_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:40:14_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:40:14_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.journal
After features/support/hooks.rb:75 0.000
Feature: Installing Tails to a USB drive
Tags: @product
49.102
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:245 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.681
And I create a file in the Persistent directory 0.075
And I temporarily create a 7200 MiB disk named "install" 0.041
And I create a gpt partition with a vfat filesystem on disk "install" 4.164
And I plug USB drive "install" 2.441
And I install Tails with Persistent Storage to USB drive "install" by cloning 27.697
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:48:in `And I install Tails with Persistent Storage to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:291 4.286 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 00:41:07)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:07_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:07_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:07_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:07_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:75 0.001
Feature: Installing Tails to a USB drive
Tags: @product
39.269
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:245 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.113
And I temporarily create a 7200 MiB disk named "install" 0.052
And I plug USB drive "install" 2.455
And I install Tails to USB drive "install" by cloning 27.649
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:57:in `And I install Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:291 4.530 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 00:41:51)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:51_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:51_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:51_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:41:51_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:75 0.000
Feature: Installing Tails to a USB drive
Tags: @product
50.682
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:245 0.003
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.123
And I have started Tails from DVD without network and logged in 8.830
And I clone USB drive "__internal" to a temporary USB drive "install" 1.340
And I plug USB drive "install" 2.453
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 27.933
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:71:in `When I reinstall Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:291 4.176 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 00:42:46)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:42:46_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:42:46_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:42:46_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/00:42:46_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:75 0.120
Feature: Upgrading an old Tails USB installation
Tags: @product
1:0.820
Scenario Upgrading an old Tails USB installation from another Tails USB drive
Before features/support/hooks.rb:245 0.006
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.087
And I log in to a new session 18.813
And I clone USB drive "old" to a new USB drive "to_upgrade" 1.059
And I plug USB drive "to_upgrade" 2.504
When I upgrade Tails to USB drive "to_upgrade" by cloning 28.356
The 
The Dogtail init script raised: SearchError: child of [desktop frame | main]: "tails-installer" application
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:148:in `new'
./features/step_definitions/usb.rb:148:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_upgrade.feature:65:in `When I upgrade Tails to USB drive "to_upgrade" by cloning'
Then the running Tails is installed on USB drive "to_upgrade" 0.000
And I unplug USB drive "to_upgrade" 0.000
And I unplug USB drive "__internal" 0.000
After features/support/hooks.rb:291 4.458 
SCENARIO FAILED: 'Upgrading an old Tails USB installation from another Tails USB drive' (at time 01:23:34)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/01:23:34_Upgrading_an_old_Tails_USB_installation_from_another_Tails_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/01:23:34_Upgrading_an_old_Tails_USB_installation_from_another_Tails_USB_drive.mkv
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/01:23:34_Upgrading_an_old_Tails_USB_installation_from_another_Tails_USB_drive.boot-log
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/4671/artifact/build-artifacts/01:23:34_Upgrading_an_old_Tails_USB_installation_from_another_Tails_USB_drive.journal
After features/support/hooks.rb:75 0.000
Feature: Packages are up-to-date
Tags: @source
2.644
Scenario All packages are up-to-date
Before features/support/hooks.rb:467 0.000
Steps
Given I have the build manifest for the image under test 0.000
Then all packages listed in the build manifest are up-to-date 2.644
Command 
Command failed (returned pid 56847 exit 1): ["/var/lib/jenkins/workspace/test_Tails_ISO_stable/bin/needed-package-updates", "--config=/var/lib/jenkins/workspace/test_Tails_ISO_stable/config/ci/needed-package-updates.yml", "--file=/var/lib/jenkins/workspace/test_Tails_ISO_stable/tmp/tails-amd64-stable@f0d914cd6f-20240217T0716Z.build-manifest", {:err=>[:child, :out]}]:
INFO: Check local file /var/lib/jenkins/workspace/test_Tails_ISO_stable/tmp/tails-amd64-stable@f0d914cd6f-20240217T0716Z.build-manifest

INFO: Need to upgrade to a new APT snapshot:

  - cryptsetup (2:2.6.1-4~deb11u1~tails1) to Debian bookworm (2:2.6.1-4~deb12u2)

  - libdatetime-timezone-perl (1:2.47-1+2023c) to Debian bullseye (1:2.47-1+2024a)
.
<0> expected but was
<#<Process::Status: pid 56847 exit 1>>. (Test::Unit::AssertionFailedError)
/var/lib/jenkins/workspace/test_Tails_ISO_stable/features/support/helpers/misc_helpers.rb:307:in `block in cmd_helper'
/var/lib/jenkins/workspace/test_Tails_ISO_stable/features/support/helpers/misc_helpers.rb:303:in `popen'
/var/lib/jenkins/workspace/test_Tails_ISO_stable/features/support/helpers/misc_helpers.rb:303:in `cmd_helper'
/var/lib/jenkins/workspace/test_Tails_ISO_stable/features/step_definitions/needed_package_updates.rb:8:in `/^all packages listed in the build manifest are up-to-date$/'
features/needed_package_updates.feature:12:in `Then all packages listed in the build manifest are up-to-date'
After features/support/hooks.rb:474 0.000
After features/support/hooks.rb:75 0.000