Cucumber Reports (no 4677) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4677	21 Feb 2024, 12:23

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:19.555	Passed

Tags: @product @not_release_blocker

38.581

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.953

And I temporarily create a 4 GiB disk named "gptfat" 0.043

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.040

And I plug USB drive "gptfat" 2.445

When I start Tails Installer 22.046

Then I am told by Tails Installer that the destination device "is too small" 0.052

Hooks

After features/support/hooks.rb:291 0.984

After features/support/hooks.rb:75 0.001

Tags: @product

33.029

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.651

And I temporarily create a 7200 MiB disk named "temp" 0.045

And I start Tails Installer 22.279

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.687

Then the "temp" USB drive is selected 0.110

When I unplug USB drive "temp" 0.213

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.835

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.565

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.674

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 4.253

And I plug USB drive "install" 2.382

And I install Tails to USB drive "install" by cloning 3:30.655

Then the running Tails is installed on USB drive "install" 11.492

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.197

After features/support/hooks.rb:75 0.105

Tags: @product

3:51.691

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.172

And I temporarily create a 7200 MiB disk named "install" 0.059

And I plug USB drive "install" 2.446

And I install Tails to USB drive "install" by cloning 3:28.406

Then the running Tails is installed on USB drive "install" 12.519

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.063

After features/support/hooks.rb:75 0.109

Tags: @product

4:32.364

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.049

And I create a file in the Persistent directory 0.102

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 6.337

And I plug USB drive "install" 2.766

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.827

Then the running Tails is installed on USB drive "install" 13.874

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.293

Hooks

After features/support/hooks.rb:291 2.124

After features/support/hooks.rb:75 0.120

Tags: @product

3:58.746

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.566

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.472

And I install Tails to USB drive "install" by cloning 3:29.147

Then the running Tails is installed on USB drive "install" 16.402

And there is no persistence partition on USB drive "install" 0.101

Hooks

After features/support/hooks.rb:291 1.805

After features/support/hooks.rb:75 0.095

Tags: @product

4:4.805

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.464

And I have started Tails from DVD without network and logged in 8.853

And I clone USB drive "__internal" to a temporary USB drive "install" 1.161

And I plug USB drive "install" 2.452

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.763

Then the running Tails is installed on USB drive "install" 13.027

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.223

After features/support/hooks.rb:75 0.111

Tags: @product @uefi

1:30.301

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.651

And I power off the computer 0.357

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:13.912

Then Tails is running from USB drive "__internal" 0.379

And the boot device has safe access rights 3.927

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:291 0.648

After features/support/hooks.rb:75 0.017

Tags: @product

2:42.395

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.071

And I plug and mount a USB drive containing a Tails USB image 35.337

And I create a 7200 MiB disk named "usbimage" 0.057

And I plug USB drive "usbimage" 2.414

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:56.514

Hooks

After features/support/hooks.rb:291 2.571

After features/support/hooks.rb:75 0.080

Tags: @product

1:30.073

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.212

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.474

Then Tails is running from USB drive "usbimage" 0.500

And the label of the system partition on "usbimage" is "Tails" 0.229

And the system partition on "usbimage" is an EFI system partition 0.205

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.164

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.090

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.108

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:291 0.771

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:19.555	Passed

Feature Report