Cucumber Reports (no 4679) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4679	23 Feb 2024, 12:08

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:11.804	Passed

Tags: @product @not_release_blocker

35.214

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.451

And I temporarily create a 4 GiB disk named "gptfat" 0.032

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.992

And I plug USB drive "gptfat" 2.380

When I start Tails Installer 21.313

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 0.907

After features/support/hooks.rb:75 0.001

Tags: @product

33.149

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.148

And I temporarily create a 7200 MiB disk named "temp" 0.028

And I start Tails Installer 22.007

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.654

Then the "temp" USB drive is selected 0.082

When I unplug USB drive "temp" 0.190

Then a suitable USB device is not found 0.016

Hooks

After features/support/hooks.rb:291 0.692

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.992

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.882

And I temporarily create a 7200 MiB disk named "install" 0.054

And I create a gpt partition with a vfat filesystem on disk "install" 4.193

And I plug USB drive "install" 2.441

And I install Tails to USB drive "install" by cloning 3:29.652

Then the running Tails is installed on USB drive "install" 10.697

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.117

After features/support/hooks.rb:75 0.105

Tags: @product

3:47.059

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.864

And I temporarily create a 7200 MiB disk named "install" 0.036

And I plug USB drive "install" 2.375

And I install Tails to USB drive "install" by cloning 3:27.198

Then the running Tails is installed on USB drive "install" 9.520

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.053

After features/support/hooks.rb:75 0.105

Tags: @product

4:13.992

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.286

And I create a file in the Persistent directory 0.074

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 4.106

And I plug USB drive "install" 2.434

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.105

Then the running Tails is installed on USB drive "install" 13.029

And there is a persistence partition on USB drive "install" 0.082

And the USB drive "install" contains the same files as my persistent storage 2.827

Hooks

After features/support/hooks.rb:291 1.699

After features/support/hooks.rb:75 0.113

Tags: @product

3:55.650

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.059

And I temporarily create a 7200 MiB disk named "install" 0.025

And I plug USB drive "install" 2.518

And I install Tails to USB drive "install" by cloning 3:29.889

Then the running Tails is installed on USB drive "install" 13.090

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.467

After features/support/hooks.rb:75 0.100

Tags: @product

3:59.790

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.474

And I have started Tails from DVD without network and logged in 7.904

And I clone USB drive "__internal" to a temporary USB drive "install" 1.202

And I plug USB drive "install" 2.437

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.521

Then the running Tails is installed on USB drive "install" 10.174

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.031

After features/support/hooks.rb:75 0.121

Tags: @product @uefi

1:33.697

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.148

And I power off the computer 0.315

And the computer is set to boot in UEFI mode 0.021

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.680

Then Tails is running from USB drive "__internal" 0.293

And the boot device has safe access rights 3.136

And Tails has started in UEFI mode 0.101

Hooks

After features/support/hooks.rb:291 0.678

After features/support/hooks.rb:75 0.006

Tags: @product

1:30.490

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.131

And I plug and mount a USB drive containing a Tails USB image 31.470

And I create a 7200 MiB disk named "usbimage" 0.031

And I plug USB drive "usbimage" 2.393

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 48.464

Hooks

After features/support/hooks.rb:291 1.776

After features/support/hooks.rb:75 0.090

Tags: @product

1:7.766

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.151

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.853

Then Tails is running from USB drive "usbimage" 0.812

And the label of the system partition on "usbimage" is "Tails" 0.241

And the system partition on "usbimage" is an EFI system partition 0.201

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.202

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.094

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.099

And the system partition on "usbimage" has the expected flags 0.107

Hooks

After features/support/hooks.rb:291 0.615

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:11.804	Passed

Feature Report