Cucumber Reports (no 4680) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4680	24 Feb 2024, 12:22

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:27.878	Passed

Tags: @product @not_release_blocker

39.260

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.384

And I temporarily create a 4 GiB disk named "gptfat" 0.051

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.079

And I plug USB drive "gptfat" 2.459

When I start Tails Installer 22.243

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 0.996

After features/support/hooks.rb:75 0.001

Tags: @product

33.185

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.030

And I temporarily create a 7200 MiB disk named "temp" 0.059

And I start Tails Installer 22.013

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.711

Then the "temp" USB drive is selected 0.115

When I unplug USB drive "temp" 0.201

Then a suitable USB device is not found 0.033

Hooks

After features/support/hooks.rb:291 0.826

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.633

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.744

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 4.148

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:31.523

Then the running Tails is installed on USB drive "install" 11.656

But there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 0.994

After features/support/hooks.rb:75 0.108

Tags: @product

3:51.921

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.913

And I temporarily create a 7200 MiB disk named "install" 0.058

And I plug USB drive "install" 2.435

And I install Tails to USB drive "install" by cloning 3:29.446

Then the running Tails is installed on USB drive "install" 11.994

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.159

After features/support/hooks.rb:75 0.103

Tags: @product

4:27.941

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.270

And I create a file in the Persistent directory 0.081

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.140

And I plug USB drive "install" 2.473

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.601

Then the running Tails is installed on USB drive "install" 12.927

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 3.331

Hooks

After features/support/hooks.rb:291 1.684

After features/support/hooks.rb:75 0.115

Tags: @product

4:4.427

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.478

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.498

And I install Tails to USB drive "install" by cloning 3:32.965

Then the running Tails is installed on USB drive "install" 16.336

And there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 1.852

After features/support/hooks.rb:75 0.096

Tags: @product

4:25.711

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.668

And I have started Tails from DVD without network and logged in 9.740

And I clone USB drive "__internal" to a temporary USB drive "install" 0.987

And I plug USB drive "install" 2.511

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:49.927

Then the running Tails is installed on USB drive "install" 12.802

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.121

After features/support/hooks.rb:75 0.099

Tags: @product @uefi

1:35.874

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.731

And I power off the computer 0.324

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.621

Then Tails is running from USB drive "__internal" 0.360

And the boot device has safe access rights 3.744

And Tails has started in UEFI mode 0.064

Hooks

After features/support/hooks.rb:291 0.695

After features/support/hooks.rb:75 0.006

Tags: @product

1:40.186

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 9.518

And I plug and mount a USB drive containing a Tails USB image 32.779

And I create a 7200 MiB disk named "usbimage" 0.047

And I plug USB drive "usbimage" 2.432

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 55.407

Hooks

After features/support/hooks.rb:291 1.243

After features/support/hooks.rb:75 0.089

Tags: @product

1:10.736

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.155

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.154

Then Tails is running from USB drive "usbimage" 0.500

And the label of the system partition on "usbimage" is "Tails" 0.250

And the system partition on "usbimage" is an EFI system partition 0.174

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.157

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.163

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.076

And the system partition on "usbimage" has the expected flags 0.103

Hooks

After features/support/hooks.rb:291 0.683

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:27.878	Passed

Feature Report