Cucumber Reports (no 4681) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4681	25 Feb 2024, 12:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:46.466	Passed

Tags: @product @not_release_blocker

37.101

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.642

And I temporarily create a 4 GiB disk named "gptfat" 0.047

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.068

And I plug USB drive "gptfat" 2.408

When I start Tails Installer 21.885

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:291 0.918

After features/support/hooks.rb:75 0.001

Tags: @product

32.967

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 7.666

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 22.177

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.697

Then the "temp" USB drive is selected 0.113

When I unplug USB drive "temp" 0.219

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.745

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.927

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.423

And I temporarily create a 7200 MiB disk named "install" 0.089

And I create a gpt partition with a vfat filesystem on disk "install" 5.147

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:28.629

Then the running Tails is installed on USB drive "install" 11.126

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.346

After features/support/hooks.rb:75 0.112

Tags: @product

3:50.140

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.051

And I temporarily create a 7200 MiB disk named "install" 0.048

And I plug USB drive "install" 2.417

And I install Tails to USB drive "install" by cloning 3:28.264

Then the running Tails is installed on USB drive "install" 11.257

But there is no persistence partition on USB drive "install" 0.100

Hooks

After features/support/hooks.rb:291 1.083

After features/support/hooks.rb:75 0.140

Tags: @product

4:17.898

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.946

And I create a file in the Persistent directory 0.111

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 4.131

And I plug USB drive "install" 2.479

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.079

Then the running Tails is installed on USB drive "install" 13.303

And there is a persistence partition on USB drive "install" 0.090

And the USB drive "install" contains the same files as my persistent storage 3.693

Hooks

After features/support/hooks.rb:291 2.825

After features/support/hooks.rb:75 0.119

Tags: @product

3:57.467

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.425

And I temporarily create a 7200 MiB disk named "install" 0.040

And I plug USB drive "install" 2.420

And I install Tails to USB drive "install" by cloning 3:29.755

Then the running Tails is installed on USB drive "install" 14.744

And there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.627

After features/support/hooks.rb:75 0.097

Tags: @product

4:3.494

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.236

And I have started Tails from DVD without network and logged in 8.532

And I clone USB drive "__internal" to a temporary USB drive "install" 1.004

And I plug USB drive "install" 2.445

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.428

Then the running Tails is installed on USB drive "install" 11.753

And there is no persistence partition on USB drive "install" 0.093

Hooks

After features/support/hooks.rb:291 1.026

After features/support/hooks.rb:75 0.110

Tags: @product @uefi

1:43.400

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 24.607

And I power off the computer 0.324

And the computer is set to boot in UEFI mode 0.032

When I start Tails from USB drive "__internal" with network unplugged and I login 1:14.151

Then Tails is running from USB drive "__internal" 0.380

And the boot device has safe access rights 3.845

And Tails has started in UEFI mode 0.058

Hooks

After features/support/hooks.rb:291 0.881

After features/support/hooks.rb:75 0.008

Tags: @product

1:38.267

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.002

And I plug and mount a USB drive containing a Tails USB image 29.997

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.470

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 57.754

Hooks

After features/support/hooks.rb:291 2.670

After features/support/hooks.rb:75 0.082

Tags: @product

1:9.800

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.148

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.075

Then Tails is running from USB drive "usbimage" 0.520

And the label of the system partition on "usbimage" is "Tails" 0.248

And the system partition on "usbimage" is an EFI system partition 0.181

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.197

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.166

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.119

And the system partition on "usbimage" has the expected flags 0.143

Hooks

After features/support/hooks.rb:291 0.699

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:46.466	Passed

Feature Report