Cucumber Reports (no 4684) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4684	27 Feb 2024, 21:47

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:1.933	Passed

Tags: @product @not_release_blocker

35.972

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.700

And I temporarily create a 4 GiB disk named "gptfat" 0.053

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.011

And I plug USB drive "gptfat" 2.590

When I start Tails Installer 20.550

Then I am told by Tails Installer that the destination device "is too small" 0.065

Hooks

After features/support/hooks.rb:291 0.972

After features/support/hooks.rb:75 0.001

Tags: @product

29.578

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.079

And I temporarily create a 7200 MiB disk named "temp" 0.051

And I start Tails Installer 18.168

But a suitable USB device is not found 0.044

When I plug USB drive "temp" 2.912

Then the "temp" USB drive is selected 0.089

When I unplug USB drive "temp" 0.213

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.986

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.108

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.057

And I temporarily create a 7200 MiB disk named "install" 0.040

And I create a gpt partition with a vfat filesystem on disk "install" 4.169

And I plug USB drive "install" 2.466

And I install Tails to USB drive "install" by cloning 3:26.194

Then the running Tails is installed on USB drive "install" 11.123

But there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:291 1.091

After features/support/hooks.rb:75 0.111

Tags: @product

3:55.930

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.159

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.426

And I install Tails to USB drive "install" by cloning 3:31.262

Then the running Tails is installed on USB drive "install" 13.943

But there is no persistence partition on USB drive "install" 0.095

Hooks

After features/support/hooks.rb:291 1.848

After features/support/hooks.rb:75 0.128

Tags: @product

4:27.089

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.087

And I create a file in the Persistent directory 0.066

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 5.160

And I plug USB drive "install" 3.061

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.216

Then the running Tails is installed on USB drive "install" 14.314

And there is a persistence partition on USB drive "install" 0.075

And the USB drive "install" contains the same files as my persistent storage 3.059

Hooks

After features/support/hooks.rb:291 2.044

After features/support/hooks.rb:75 0.124

Tags: @product

3:56.009

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.012

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.093

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.683

And I install Tails to USB drive "install" by cloning 3:28.152

Then the running Tails is installed on USB drive "install" 13.971

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.995

After features/support/hooks.rb:75 0.107

Tags: @product

4:2.108

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.356

And I have started Tails from DVD without network and logged in 9.611

And I clone USB drive "__internal" to a temporary USB drive "install" 1.397

And I plug USB drive "install" 2.552

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.730

Then the running Tails is installed on USB drive "install" 11.376

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.407

After features/support/hooks.rb:75 0.163

Tags: @product @uefi

1:43.385

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.009

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.681

And I power off the computer 0.342

And the computer is set to boot in UEFI mode 0.099

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.006

Then Tails is running from USB drive "__internal" 0.330

And the boot device has safe access rights 2.865

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.757

After features/support/hooks.rb:75 0.006

Tags: @product

1:38.334

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.129

And I plug and mount a USB drive containing a Tails USB image 29.448

And I create a 7200 MiB disk named "usbimage" 0.096

And I plug USB drive "usbimage" 2.398

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 58.261

Hooks

After features/support/hooks.rb:291 1.654

After features/support/hooks.rb:75 0.089

Tags: @product

1:21.415

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.166

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:20.231

Then Tails is running from USB drive "usbimage" 0.308

And the label of the system partition on "usbimage" is "Tails" 0.211

And the system partition on "usbimage" is an EFI system partition 0.139

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.129

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.081

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.067

Hooks

After features/support/hooks.rb:291 0.574

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:1.933	Passed

Feature Report