Cucumber Reports (no 4687) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4687	29 Feb 2024, 15:02

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:27.036	Passed

Tags: @product @not_release_blocker

33.543

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.940

And I temporarily create a 4 GiB disk named "gptfat" 0.042

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.984

And I plug USB drive "gptfat" 2.560

When I start Tails Installer 18.975

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 0.867

After features/support/hooks.rb:75 0.001

Tags: @product

28.841

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.062

And I temporarily create a 7200 MiB disk named "temp" 0.060

And I start Tails Installer 17.858

But a suitable USB device is not found 0.018

When I plug USB drive "temp" 2.546

Then the "temp" USB drive is selected 0.080

When I unplug USB drive "temp" 0.180

Then a suitable USB device is not found 0.032

Hooks

After features/support/hooks.rb:291 0.720

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.971

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.002

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.114

And I plug USB drive "install" 2.500

And I install Tails to USB drive "install" by cloning 3:27.970

Then the running Tails is installed on USB drive "install" 10.255

But there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.372

After features/support/hooks.rb:75 0.110

Tags: @product

3:46.719

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.157

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.407

And I install Tails to USB drive "install" by cloning 3:26.037

Then the running Tails is installed on USB drive "install" 10.004

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.053

After features/support/hooks.rb:75 0.111

Tags: @product

4:16.212

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.072

And I create a file in the Persistent directory 0.131

And I temporarily create a 7200 MiB disk named "install" 0.055

And I create a gpt partition with a vfat filesystem on disk "install" 4.043

And I plug USB drive "install" 2.398

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.251

Then the running Tails is installed on USB drive "install" 13.646

And there is a persistence partition on USB drive "install" 0.060

And the USB drive "install" contains the same files as my persistent storage 2.553

Hooks

After features/support/hooks.rb:291 1.972

After features/support/hooks.rb:75 0.122

Tags: @product

3:54.295

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.117

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.496

And I install Tails to USB drive "install" by cloning 3:27.329

Then the running Tails is installed on USB drive "install" 13.251

And there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.930

After features/support/hooks.rb:75 0.101

Tags: @product

4:1.708

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.453

And I have started Tails from DVD without network and logged in 8.565

And I clone USB drive "__internal" to a temporary USB drive "install" 1.169

And I plug USB drive "install" 2.639

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.288

Then the running Tails is installed on USB drive "install" 11.489

And there is no persistence partition on USB drive "install" 0.104

Hooks

After features/support/hooks.rb:291 1.400

After features/support/hooks.rb:75 0.112

Tags: @product @uefi

1:41.985

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.075

And I power off the computer 0.370

And the computer is set to boot in UEFI mode 0.029

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.251

Then Tails is running from USB drive "__internal" 0.292

And the boot device has safe access rights 2.908

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.725

After features/support/hooks.rb:75 0.005

Tags: @product

1:34.556

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.001

Steps

Given I have started Tails from DVD without network and logged in 8.195

And I plug and mount a USB drive containing a Tails USB image 27.147

And I create a 7200 MiB disk named "usbimage" 0.055

And I plug USB drive "usbimage" 2.373

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.784

Hooks

After features/support/hooks.rb:291 1.783

After features/support/hooks.rb:75 0.114

Tags: @product

1:16.202

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.152

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:14.947

Then Tails is running from USB drive "usbimage" 0.348

And the label of the system partition on "usbimage" is "Tails" 0.216

And the system partition on "usbimage" is an EFI system partition 0.157

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.126

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.089

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.090

And the system partition on "usbimage" has the expected flags 0.073

Hooks

After features/support/hooks.rb:291 0.686

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:27.036	Passed

Feature Report