Cucumber Reports (no 4690) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4690	01 Mar 2024, 00:52

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:41.558	Passed

Tags: @product @not_release_blocker

33.428

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.928

And I temporarily create a 4 GiB disk named "gptfat" 0.067

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.012

And I plug USB drive "gptfat" 2.528

When I start Tails Installer 18.842

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:291 0.911

After features/support/hooks.rb:75 0.001

Tags: @product

29.980

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.144

And I temporarily create a 7200 MiB disk named "temp" 0.047

And I start Tails Installer 18.837

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.644

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.186

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 1.356

After features/support/hooks.rb:75 0.000

Tags: @product

3:50.702

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.093

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 4.086

And I plug USB drive "install" 2.508

And I install Tails to USB drive "install" by cloning 3:25.065

Then the running Tails is installed on USB drive "install" 10.841

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.380

After features/support/hooks.rb:75 0.135

Tags: @product

3:48.642

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.347

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.472

And I install Tails to USB drive "install" by cloning 3:27.186

Then the running Tails is installed on USB drive "install" 10.509

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.246

After features/support/hooks.rb:75 0.111

Tags: @product

4:50.345

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.271

And I create a file in the Persistent directory 0.066

And I temporarily create a 7200 MiB disk named "install" 0.620

And I create a gpt partition with a vfat filesystem on disk "install" 4.234

And I plug USB drive "install" 2.496

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:13.720

Then the running Tails is installed on USB drive "install" 12.937

And there is a persistence partition on USB drive "install" 0.059

And the USB drive "install" contains the same files as my persistent storage 2.938

Hooks

After features/support/hooks.rb:291 2.305

After features/support/hooks.rb:75 0.121

Tags: @product

3:55.601

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.615

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.533

And I install Tails to USB drive "install" by cloning 3:26.431

Then the running Tails is installed on USB drive "install" 15.917

And there is no persistence partition on USB drive "install" 0.053

Hooks

After features/support/hooks.rb:291 1.790

After features/support/hooks.rb:75 0.105

Tags: @product

4:19.801

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.705

And I have started Tails from DVD without network and logged in 8.420

And I clone USB drive "__internal" to a temporary USB drive "install" 1.017

And I plug USB drive "install" 2.486

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:46.877

Then the running Tails is installed on USB drive "install" 11.226

And there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.148

After features/support/hooks.rb:75 0.108

Tags: @product @uefi

1:42.815

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.044

And I power off the computer 0.334

And the computer is set to boot in UEFI mode 0.030

When I start Tails from USB drive "__internal" with network unplugged and I login 1:28.988

Then Tails is running from USB drive "__internal" 0.336

And the boot device has safe access rights 3.016

And Tails has started in UEFI mode 0.064

Hooks

After features/support/hooks.rb:291 0.611

After features/support/hooks.rb:75 0.005

Tags: @product

1:50.705

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.355

And I plug and mount a USB drive containing a Tails USB image 27.301

And I create a 7200 MiB disk named "usbimage" 0.059

And I plug USB drive "usbimage" 2.401

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:12.586

Hooks

After features/support/hooks.rb:291 2.064

After features/support/hooks.rb:75 0.084

Tags: @product

1:19.536

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.170

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.319

Then Tails is running from USB drive "usbimage" 0.291

And the label of the system partition on "usbimage" is "Tails" 0.219

And the system partition on "usbimage" is an EFI system partition 0.158

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.143

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.073

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.088

And the system partition on "usbimage" has the expected flags 0.071

Hooks

After features/support/hooks.rb:291 0.732

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:41.558	Passed

Feature Report