Cucumber Reports (no 4692) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4692	01 Mar 2024, 16:36

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:44.556	Passed

Tags: @product @not_release_blocker

34.706

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.855

And I temporarily create a 4 GiB disk named "gptfat" 0.040

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.064

And I plug USB drive "gptfat" 2.455

When I start Tails Installer 20.240

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 0.911

After features/support/hooks.rb:75 0.000

Tags: @product

29.111

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.081

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 17.942

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.739

Then the "temp" USB drive is selected 0.082

When I unplug USB drive "temp" 0.178

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.728

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.089

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.875

And I temporarily create a 7200 MiB disk named "install" 0.053

And I create a gpt partition with a vfat filesystem on disk "install" 4.118

And I plug USB drive "install" 2.557

And I install Tails to USB drive "install" by cloning 3:25.951

Then the running Tails is installed on USB drive "install" 11.464

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.199

After features/support/hooks.rb:75 0.123

Tags: @product

3:48.768

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 10.093

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.421

And I install Tails to USB drive "install" by cloning 3:26.240

Then the running Tails is installed on USB drive "install" 9.883

But there is no persistence partition on USB drive "install" 0.081

Hooks

After features/support/hooks.rb:291 1.038

After features/support/hooks.rb:75 0.110

Tags: @product

4:18.398

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.972

And I create a file in the Persistent directory 0.082

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 4.095

And I plug USB drive "install" 2.479

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.134

Then the running Tails is installed on USB drive "install" 14.675

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.835

Hooks

After features/support/hooks.rb:291 3.497

After features/support/hooks.rb:75 0.113

Tags: @product

3:54.381

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.136

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.452

And I install Tails to USB drive "install" by cloning 3:26.594

Then the running Tails is installed on USB drive "install" 14.098

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.772

After features/support/hooks.rb:75 0.108

Tags: @product

4:49.663

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.884

And I have started Tails from DVD without network and logged in 8.412

And I clone USB drive "__internal" to a temporary USB drive "install" 1.528

And I plug USB drive "install" 2.436

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:49.223

Then the running Tails is installed on USB drive "install" 38.104

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.428

After features/support/hooks.rb:75 0.100

Tags: @product @uefi

2:17.805

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 51.416

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.035

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.872

Then Tails is running from USB drive "__internal" 0.287

And the boot device has safe access rights 2.788

And Tails has started in UEFI mode 0.065

Hooks

After features/support/hooks.rb:291 0.857

After features/support/hooks.rb:75 0.006

Tags: @product

2:18.560

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.377

And I plug and mount a USB drive containing a Tails USB image 29.719

And I create a 7200 MiB disk named "usbimage" 0.054

And I plug USB drive "usbimage" 2.390

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:38.017

Hooks

After features/support/hooks.rb:291 2.355

After features/support/hooks.rb:75 0.089

Tags: @product

1:20.071

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.898

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.217

Then Tails is running from USB drive "usbimage" 0.271

And the label of the system partition on "usbimage" is "Tails" 0.184

And the system partition on "usbimage" is an EFI system partition 0.132

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.120

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.078

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.073

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:291 0.694

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:44.556	Passed

Feature Report