Cucumber Reports (no 4693) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4693	02 Mar 2024, 12:30

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:49.665	Passed

Tags: @product @not_release_blocker

33.841

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.347

And I temporarily create a 4 GiB disk named "gptfat" 0.033

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.016

And I plug USB drive "gptfat" 2.520

When I start Tails Installer 18.873

Then I am told by Tails Installer that the destination device "is too small" 0.050

Hooks

After features/support/hooks.rb:291 1.114

After features/support/hooks.rb:75 0.001

Tags: @product

29.038

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.369

And I temporarily create a 7200 MiB disk named "temp" 0.035

And I start Tails Installer 17.798

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.524

Then the "temp" USB drive is selected 0.080

When I unplug USB drive "temp" 0.184

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.692

After features/support/hooks.rb:75 0.000

Tags: @product

4:3.989

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 20.671

And I temporarily create a 7200 MiB disk named "install" 0.031

And I create a gpt partition with a vfat filesystem on disk "install" 4.134

And I plug USB drive "install" 2.462

And I install Tails to USB drive "install" by cloning 3:25.500

Then the running Tails is installed on USB drive "install" 11.110

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.236

After features/support/hooks.rb:75 0.120

Tags: @product

3:48.534

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.021

And I temporarily create a 7200 MiB disk named "install" 0.037

And I plug USB drive "install" 2.513

And I install Tails to USB drive "install" by cloning 3:27.582

Then the running Tails is installed on USB drive "install" 10.315

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.080

After features/support/hooks.rb:75 0.118

Tags: @product

4:24.778

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.200

And I create a file in the Persistent directory 0.076

And I temporarily create a 7200 MiB disk named "install" 0.032

And I create a gpt partition with a vfat filesystem on disk "install" 4.083

And I plug USB drive "install" 2.415

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:49.563

Then the running Tails is installed on USB drive "install" 13.195

And there is a persistence partition on USB drive "install" 0.069

And the USB drive "install" contains the same files as my persistent storage 3.139

Hooks

After features/support/hooks.rb:291 1.985

After features/support/hooks.rb:75 0.134

Tags: @product

3:55.821

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.646

And I temporarily create a 7200 MiB disk named "install" 0.030

And I plug USB drive "install" 2.446

And I install Tails to USB drive "install" by cloning 3:25.472

Then the running Tails is installed on USB drive "install" 15.154

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.775

After features/support/hooks.rb:75 0.102

Tags: @product

3:58.892

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.699

And I have started Tails from DVD without network and logged in 8.964

And I clone USB drive "__internal" to a temporary USB drive "install" 1.183

And I plug USB drive "install" 2.492

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:24.370

Then the running Tails is installed on USB drive "install" 11.109

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.218

After features/support/hooks.rb:75 0.133

Tags: @product @uefi

1:41.442

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.973

And I power off the computer 0.321

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:25.832

Then Tails is running from USB drive "__internal" 0.310

And the boot device has safe access rights 2.932

And Tails has started in UEFI mode 0.044

Hooks

After features/support/hooks.rb:291 0.557

After features/support/hooks.rb:75 0.031

Tags: @product

1:36.443

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.428

And I plug and mount a USB drive containing a Tails USB image 31.794

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.401

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.772

Hooks

After features/support/hooks.rb:291 1.572

After features/support/hooks.rb:75 0.094

Tags: @product

1:16.883

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.132

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:15.622

Then Tails is running from USB drive "usbimage" 0.300

And the label of the system partition on "usbimage" is "Tails" 0.251

And the system partition on "usbimage" is an EFI system partition 0.185

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.116

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.076

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.103

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:291 0.621

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:49.665	Passed

Feature Report