Cucumber Reports (no 4695) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4695	03 Mar 2024, 15:28

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:36.344	Passed

Tags: @product @not_release_blocker

33.904

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.900

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.004

And I plug USB drive "gptfat" 2.478

When I start Tails Installer 19.411

Then I am told by Tails Installer that the destination device "is too small" 0.059

Hooks

After features/support/hooks.rb:291 1.461

After features/support/hooks.rb:75 0.001

Tags: @product

28.878

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.922

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 17.607

But a suitable USB device is not found 0.018

When I plug USB drive "temp" 2.983

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.177

Then a suitable USB device is not found 0.041

Hooks

After features/support/hooks.rb:291 0.777

After features/support/hooks.rb:75 0.000

Tags: @product

4:12.115

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.890

And I temporarily create a 7200 MiB disk named "install" 0.050

And I create a gpt partition with a vfat filesystem on disk "install" 4.075

And I plug USB drive "install" 2.568

And I install Tails to USB drive "install" by cloning 3:46.906

Then the running Tails is installed on USB drive "install" 10.538

But there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.313

After features/support/hooks.rb:75 0.109

Tags: @product

3:47.703

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.029

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.484

And I install Tails to USB drive "install" by cloning 3:26.747

Then the running Tails is installed on USB drive "install" 10.315

But there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.408

After features/support/hooks.rb:75 0.109

Tags: @product

4:20.742

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.642

And I create a file in the Persistent directory 0.108

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.086

And I plug USB drive "install" 2.429

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:48.899

Then the running Tails is installed on USB drive "install" 11.673

And there is a persistence partition on USB drive "install" 0.060

And the USB drive "install" contains the same files as my persistent storage 2.789

Hooks

After features/support/hooks.rb:291 1.888

After features/support/hooks.rb:75 0.120

Tags: @product

3:53.000

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.530

And I temporarily create a 7200 MiB disk named "install" 0.340

And I plug USB drive "install" 2.439

And I install Tails to USB drive "install" by cloning 3:27.430

Then the running Tails is installed on USB drive "install" 12.201

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.834

After features/support/hooks.rb:75 0.106

Tags: @product

3:57.864

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.692

And I have started Tails from DVD without network and logged in 8.282

And I clone USB drive "__internal" to a temporary USB drive "install" 1.102

And I plug USB drive "install" 2.450

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.335

Then the running Tails is installed on USB drive "install" 9.938

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.334

After features/support/hooks.rb:75 0.125

Tags: @product @uefi

1:34.831

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.011

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.099

And I power off the computer 0.335

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:21.172

Then Tails is running from USB drive "__internal" 0.311

And the boot device has safe access rights 2.839

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:291 0.645

After features/support/hooks.rb:75 0.021

Tags: @product

1:31.616

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.941

And I plug and mount a USB drive containing a Tails USB image 27.174

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.682

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.772

Hooks

After features/support/hooks.rb:291 1.786

After features/support/hooks.rb:75 0.083

Tags: @product

1:15.688

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.167

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:14.592

Then Tails is running from USB drive "usbimage" 0.288

And the label of the system partition on "usbimage" is "Tails" 0.171

And the system partition on "usbimage" is an EFI system partition 0.133

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.117

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.062

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.079

And the system partition on "usbimage" has the expected flags 0.073

Hooks

After features/support/hooks.rb:291 0.645

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:36.344	Passed

Feature Report