Cucumber Reports (no 4699) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4699	05 Mar 2024, 12:20

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.340	Passed

Tags: @product @not_release_blocker

35.001

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.111

And I temporarily create a 4 GiB disk named "gptfat" 0.034

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.127

And I plug USB drive "gptfat" 2.612

When I start Tails Installer 19.072

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 1.824

After features/support/hooks.rb:75 0.001

Tags: @product

29.692

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.832

And I temporarily create a 7200 MiB disk named "temp" 0.029

And I start Tails Installer 17.712

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.791

Then the "temp" USB drive is selected 0.098

When I unplug USB drive "temp" 0.183

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.787

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.209

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.070

And I temporarily create a 7200 MiB disk named "install" 0.032

And I create a gpt partition with a vfat filesystem on disk "install" 4.060

And I plug USB drive "install" 2.482

And I install Tails to USB drive "install" by cloning 3:25.675

Then the running Tails is installed on USB drive "install" 11.821

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.237

After features/support/hooks.rb:75 0.115

Tags: @product

3:47.710

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.098

And I temporarily create a 7200 MiB disk named "install" 0.072

And I plug USB drive "install" 2.449

And I install Tails to USB drive "install" by cloning 3:25.212

Then the running Tails is installed on USB drive "install" 11.809

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.381

After features/support/hooks.rb:75 0.135

Tags: @product

4:24.738

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.274

And I create a file in the Persistent directory 0.074

And I temporarily create a 7200 MiB disk named "install" 0.035

And I create a gpt partition with a vfat filesystem on disk "install" 4.143

And I plug USB drive "install" 2.455

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:49.732

Then the running Tails is installed on USB drive "install" 13.036

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 2.919

Hooks

After features/support/hooks.rb:291 1.926

After features/support/hooks.rb:75 0.144

Tags: @product

3:55.339

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.640

And I temporarily create a 7200 MiB disk named "install" 0.028

And I plug USB drive "install" 2.504

And I install Tails to USB drive "install" by cloning 3:27.914

Then the running Tails is installed on USB drive "install" 13.171

And there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.926

After features/support/hooks.rb:75 0.104

Tags: @product

4:23.320

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.116

And I have started Tails from DVD without network and logged in 8.656

And I clone USB drive "__internal" to a temporary USB drive "install" 1.888

And I plug USB drive "install" 2.548

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:47.933

Then the running Tails is installed on USB drive "install" 12.112

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.163

After features/support/hooks.rb:75 0.126

Tags: @product @uefi

1:39.734

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.015

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.232

And I power off the computer 0.339

And the computer is set to boot in UEFI mode 0.021

When I start Tails from USB drive "__internal" with network unplugged and I login 1:25.437

Then Tails is running from USB drive "__internal" 0.335

And the boot device has safe access rights 3.315

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 0.882

After features/support/hooks.rb:75 0.006

Tags: @product

1:33.084

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.979

And I plug and mount a USB drive containing a Tails USB image 28.339

And I create a 7200 MiB disk named "usbimage" 0.038

And I plug USB drive "usbimage" 2.410

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.317

Hooks

After features/support/hooks.rb:291 2.586

After features/support/hooks.rb:75 0.099

Tags: @product

1:16.508

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.126

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:15.316

Then Tails is running from USB drive "usbimage" 0.301

And the label of the system partition on "usbimage" is "Tails" 0.230

And the system partition on "usbimage" is an EFI system partition 0.143

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.138

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.099

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.074

And the system partition on "usbimage" has the expected flags 0.076

Hooks

After features/support/hooks.rb:291 0.611

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:57.340	Passed

Feature Report