Cucumber Reports (no 4701) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4701	06 Mar 2024, 12:14

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:40.650	Passed

Tags: @product @not_release_blocker

33.856

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.118

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.088

And I plug USB drive "gptfat" 2.497

When I start Tails Installer 19.062

Then I am told by Tails Installer that the destination device "is too small" 0.039

Hooks

After features/support/hooks.rb:291 1.472

After features/support/hooks.rb:75 0.001

Tags: @product

29.643

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.446

And I temporarily create a 7200 MiB disk named "temp" 0.312

And I start Tails Installer 17.863

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.681

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.213

Then a suitable USB device is not found 0.027

Hooks

After features/support/hooks.rb:291 1.564

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.651

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.440

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 4.107

And I plug USB drive "install" 2.484

And I install Tails to USB drive "install" by cloning 3:26.096

Then the running Tails is installed on USB drive "install" 11.382

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.202

After features/support/hooks.rb:75 0.114

Tags: @product

3:47.685

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.096

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.537

And I install Tails to USB drive "install" by cloning 3:26.197

Then the running Tails is installed on USB drive "install" 10.743

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.154

After features/support/hooks.rb:75 0.120

Tags: @product

4:26.098

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.877

And I create a file in the Persistent directory 0.076

And I temporarily create a 7200 MiB disk named "install" 0.039

And I create a gpt partition with a vfat filesystem on disk "install" 4.073

And I plug USB drive "install" 2.420

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.428

Then the running Tails is installed on USB drive "install" 13.438

And there is a persistence partition on USB drive "install" 0.078

And the USB drive "install" contains the same files as my persistent storage 3.665

Hooks

After features/support/hooks.rb:291 2.052

After features/support/hooks.rb:75 0.142

Tags: @product

3:59.350

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.671

And I temporarily create a 7200 MiB disk named "install" 0.037

And I plug USB drive "install" 2.571

And I install Tails to USB drive "install" by cloning 3:31.316

Then the running Tails is installed on USB drive "install" 13.692

And there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.594

After features/support/hooks.rb:75 0.097

Tags: @product

4:1.226

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.836

And I have started Tails from DVD without network and logged in 8.546

And I clone USB drive "__internal" to a temporary USB drive "install" 1.204

And I plug USB drive "install" 2.437

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.299

Then the running Tails is installed on USB drive "install" 10.835

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.453

After features/support/hooks.rb:75 0.117

Tags: @product @uefi

1:38.648

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.801

And I power off the computer 0.350

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:23.851

Then Tails is running from USB drive "__internal" 0.298

And the boot device has safe access rights 3.237

And Tails has started in UEFI mode 0.078

Hooks

After features/support/hooks.rb:291 1.505

After features/support/hooks.rb:75 0.025

Tags: @product

1:32.945

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.283

And I plug and mount a USB drive containing a Tails USB image 28.550

And I create a 7200 MiB disk named "usbimage" 0.031

And I plug USB drive "usbimage" 2.396

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.682

Hooks

After features/support/hooks.rb:291 1.706

After features/support/hooks.rb:75 0.085

Tags: @product

1:17.543

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.130

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.389

Then Tails is running from USB drive "usbimage" 0.308

And the label of the system partition on "usbimage" is "Tails" 0.191

And the system partition on "usbimage" is an EFI system partition 0.174

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.123

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.072

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.070

And the system partition on "usbimage" has the expected flags 0.083

Hooks

After features/support/hooks.rb:291 1.127

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:40.650	Passed

Feature Report