Cucumber Reports (no 4710) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4710	11 Mar 2024, 19:37

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.436	Passed

Tags: @product @not_release_blocker

34.451

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.112

And I temporarily create a 4 GiB disk named "gptfat" 0.057

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.056

And I plug USB drive "gptfat" 2.484

When I start Tails Installer 19.687

Then I am told by Tails Installer that the destination device "is too small" 0.052

Hooks

After features/support/hooks.rb:291 1.225

After features/support/hooks.rb:75 0.000

Tags: @product

30.097

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.484

And I temporarily create a 7200 MiB disk named "temp" 0.058

And I start Tails Installer 17.922

But a suitable USB device is not found 0.053

When I plug USB drive "temp" 3.260

Then the "temp" USB drive is selected 0.090

When I unplug USB drive "temp" 0.207

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.732

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.868

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.753

And I temporarily create a 7200 MiB disk named "install" 0.756

And I create a gpt partition with a vfat filesystem on disk "install" 5.738

And I plug USB drive "install" 2.520

And I install Tails to USB drive "install" by cloning 3:29.646

Then the running Tails is installed on USB drive "install" 11.366

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.232

After features/support/hooks.rb:75 0.108

Tags: @product

3:48.914

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.446

And I temporarily create a 7200 MiB disk named "install" 0.058

And I plug USB drive "install" 2.632

And I install Tails to USB drive "install" by cloning 3:26.746

Then the running Tails is installed on USB drive "install" 10.969

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.234

After features/support/hooks.rb:75 0.112

Tags: @product

4:26.514

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.756

And I create a file in the Persistent directory 0.071

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 4.051

And I plug USB drive "install" 2.436

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.275

Then the running Tails is installed on USB drive "install" 13.708

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 4.101

Hooks

After features/support/hooks.rb:291 2.156

After features/support/hooks.rb:75 0.122

Tags: @product

3:58.879

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.811

And I temporarily create a 7200 MiB disk named "install" 0.053

And I plug USB drive "install" 2.431

And I install Tails to USB drive "install" by cloning 3:29.696

Then the running Tails is installed on USB drive "install" 14.799

And there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 2.321

After features/support/hooks.rb:75 0.121

Tags: @product

4:3.379

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.181

And I have started Tails from DVD without network and logged in 8.792

And I clone USB drive "__internal" to a temporary USB drive "install" 1.135

And I plug USB drive "install" 2.464

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.466

Then the running Tails is installed on USB drive "install" 12.260

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.374

After features/support/hooks.rb:75 0.127

Tags: @product @uefi

1:54.507

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.352

And I power off the computer 0.372

And the computer is set to boot in UEFI mode 0.030

When I start Tails from USB drive "__internal" with network unplugged and I login 1:38.967

Then Tails is running from USB drive "__internal" 0.377

And the boot device has safe access rights 3.352

And Tails has started in UEFI mode 0.055

Hooks

After features/support/hooks.rb:291 0.939

After features/support/hooks.rb:75 0.009

Tags: @product

1:43.153

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.618

And I plug and mount a USB drive containing a Tails USB image 32.375

And I create a 7200 MiB disk named "usbimage" 0.048

And I plug USB drive "usbimage" 2.448

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 59.662

Hooks

After features/support/hooks.rb:291 1.981

After features/support/hooks.rb:75 0.087

Tags: @product

1:21.671

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.205

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:20.352

Then Tails is running from USB drive "usbimage" 0.314

And the label of the system partition on "usbimage" is "Tails" 0.226

And the system partition on "usbimage" is an EFI system partition 0.151

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.148

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.076

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.107

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:291 0.631

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.436	Passed

Feature Report