Cucumber Reports (no 4712) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4712	12 Mar 2024, 18:08

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:50.138	Passed

Tags: @product @not_release_blocker

35.230

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.238

And I temporarily create a 4 GiB disk named "gptfat" 0.048

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.039

And I plug USB drive "gptfat" 2.557

When I start Tails Installer 19.306

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 1.787

After features/support/hooks.rb:75 0.001

Tags: @product

29.421

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.314

And I temporarily create a 7200 MiB disk named "temp" 0.043

And I start Tails Installer 18.018

But a suitable USB device is not found 0.025

When I plug USB drive "temp" 2.737

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.179

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 1.282

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.040

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.006

Steps

Given I have started Tails from DVD without network and logged in 8.252

And I temporarily create a 7200 MiB disk named "install" 0.065

And I create a gpt partition with a vfat filesystem on disk "install" 5.098

And I plug USB drive "install" 2.492

And I install Tails to USB drive "install" by cloning 3:30.011

Then the running Tails is installed on USB drive "install" 11.043

But there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.384

After features/support/hooks.rb:75 0.173

Tags: @product

3:47.973

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.370

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.435

And I install Tails to USB drive "install" by cloning 3:25.370

Then the running Tails is installed on USB drive "install" 11.660

But there is no persistence partition on USB drive "install" 0.092

Hooks

After features/support/hooks.rb:291 1.197

After features/support/hooks.rb:75 0.125

Tags: @product

4:34.727

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.733

And I create a file in the Persistent directory 0.100

And I temporarily create a 7200 MiB disk named "install" 0.050

And I create a gpt partition with a vfat filesystem on disk "install" 5.120

And I plug USB drive "install" 2.584

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:55.323

Then the running Tails is installed on USB drive "install" 15.072

And there is a persistence partition on USB drive "install" 0.094

And the USB drive "install" contains the same files as my persistent storage 3.648

Hooks

After features/support/hooks.rb:291 2.415

After features/support/hooks.rb:75 0.121

Tags: @product

4:1.356

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.431

And I temporarily create a 7200 MiB disk named "install" 0.730

And I plug USB drive "install" 2.424

And I install Tails to USB drive "install" by cloning 3:27.590

Then the running Tails is installed on USB drive "install" 14.115

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 2.110

After features/support/hooks.rb:75 0.121

Tags: @product

3:59.431

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.245

And I have started Tails from DVD without network and logged in 8.693

And I clone USB drive "__internal" to a temporary USB drive "install" 1.068

And I plug USB drive "install" 2.488

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:23.936

Then the running Tails is installed on USB drive "install" 12.949

And there is no persistence partition on USB drive "install" 0.048

Hooks

After features/support/hooks.rb:291 1.062

After features/support/hooks.rb:75 0.119

Tags: @product @uefi

1:46.297

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.077

And I power off the computer 0.356

And the computer is set to boot in UEFI mode 0.040

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.580

Then Tails is running from USB drive "__internal" 0.298

And the boot device has safe access rights 2.891

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:291 0.585

After features/support/hooks.rb:75 0.036

Tags: @product

2:18.966

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.198

And I plug and mount a USB drive containing a Tails USB image 28.348

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.427

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:39.943

Hooks

After features/support/hooks.rb:291 2.275

After features/support/hooks.rb:75 0.093

Tags: @product

1:19.693

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.193

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.272

Then Tails is running from USB drive "usbimage" 0.338

And the label of the system partition on "usbimage" is "Tails" 0.262

And the system partition on "usbimage" is an EFI system partition 0.186

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.162

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.087

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.091

And the system partition on "usbimage" has the expected flags 0.098

Hooks

After features/support/hooks.rb:291 0.754

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:50.138	Passed

Feature Report