Cucumber Reports (no 4717) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4717	13 Mar 2024, 20:52

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:33.297	Passed

Tags: @product @not_release_blocker

34.674

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.106

And I temporarily create a 4 GiB disk named "gptfat" 0.054

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.389

And I plug USB drive "gptfat" 2.462

When I start Tails Installer 19.612

Then I am told by Tails Installer that the destination device "is too small" 0.048

Hooks

After features/support/hooks.rb:291 1.602

After features/support/hooks.rb:75 0.001

Tags: @product

33.496

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.915

And I temporarily create a 7200 MiB disk named "temp" 0.525

And I start Tails Installer 19.902

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.841

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.188

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 1.742

After features/support/hooks.rb:75 0.000

Tags: @product

4:18.627

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.029

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.474

And I plug USB drive "install" 2.505

And I install Tails to USB drive "install" by cloning 3:50.535

Then the running Tails is installed on USB drive "install" 11.964

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.388

After features/support/hooks.rb:75 0.112

Tags: @product

3:50.759

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 9.308

And I temporarily create a 7200 MiB disk named "install" 0.240

And I plug USB drive "install" 2.472

And I install Tails to USB drive "install" by cloning 3:28.477

Then the running Tails is installed on USB drive "install" 10.197

But there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.500

After features/support/hooks.rb:75 0.111

Tags: @product

4:30.267

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.796

And I create a file in the Persistent directory 0.068

And I temporarily create a 7200 MiB disk named "install" 0.036

And I create a gpt partition with a vfat filesystem on disk "install" 4.035

And I plug USB drive "install" 2.492

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.991

Then the running Tails is installed on USB drive "install" 14.518

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 4.261

Hooks

After features/support/hooks.rb:291 2.747

After features/support/hooks.rb:75 0.122

Tags: @product

3:59.407

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.875

And I temporarily create a 7200 MiB disk named "install" 0.040

And I plug USB drive "install" 2.497

And I install Tails to USB drive "install" by cloning 3:29.583

Then the running Tails is installed on USB drive "install" 16.325

And there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.711

After features/support/hooks.rb:75 0.141

Tags: @product

4:5.475

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.499

And I have started Tails from DVD without network and logged in 8.525

And I clone USB drive "__internal" to a temporary USB drive "install" 1.191

And I plug USB drive "install" 2.561

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.177

Then the running Tails is installed on USB drive "install" 15.432

And there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:291 1.673

After features/support/hooks.rb:75 0.104

Tags: @product @uefi

1:44.263

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.862

And I power off the computer 0.337

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:28.908

Then Tails is running from USB drive "__internal" 0.303

And the boot device has safe access rights 2.776

And Tails has started in UEFI mode 0.047

Hooks

After features/support/hooks.rb:291 1.479

After features/support/hooks.rb:75 0.005

Tags: @product

1:36.817

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.001

Steps

Given I have started Tails from DVD without network and logged in 8.111

And I plug and mount a USB drive containing a Tails USB image 28.218

And I create a 7200 MiB disk named "usbimage" 0.058

And I plug USB drive "usbimage" 2.389

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 58.040

Hooks

After features/support/hooks.rb:291 2.194

After features/support/hooks.rb:75 0.158

Tags: @product

1:19.507

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.019

Steps

Given a computer 0.335

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.085

Then Tails is running from USB drive "usbimage" 0.280

And the label of the system partition on "usbimage" is "Tails" 0.223

And the system partition on "usbimage" is an EFI system partition 0.208

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.139

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.077

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:291 0.584

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:33.297	Passed

Feature Report