Cucumber Reports (no 4719) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4719	14 Mar 2024, 16:53

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:37.203	Passed

Tags: @product @not_release_blocker

35.570

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.355

And I temporarily create a 4 GiB disk named "gptfat" 0.060

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.064

And I plug USB drive "gptfat" 2.617

When I start Tails Installer 19.409

Then I am told by Tails Installer that the destination device "is too small" 0.062

Hooks

After features/support/hooks.rb:291 1.077

After features/support/hooks.rb:75 0.001

Tags: @product

29.996

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.979

And I temporarily create a 7200 MiB disk named "temp" 0.060

And I start Tails Installer 17.858

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.768

Then the "temp" USB drive is selected 0.079

When I unplug USB drive "temp" 0.210

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:291 0.950

After features/support/hooks.rb:75 0.000

Tags: @product

3:59.780

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.178

And I temporarily create a 7200 MiB disk named "install" 0.094

And I create a gpt partition with a vfat filesystem on disk "install" 5.174

And I plug USB drive "install" 2.527

And I install Tails to USB drive "install" by cloning 3:32.579

Then the running Tails is installed on USB drive "install" 11.163

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.269

After features/support/hooks.rb:75 0.110

Tags: @product

3:45.765

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.075

And I temporarily create a 7200 MiB disk named "install" 0.040

And I plug USB drive "install" 3.542

And I install Tails to USB drive "install" by cloning 3:23.504

Then the running Tails is installed on USB drive "install" 10.528

But there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 1.439

After features/support/hooks.rb:75 0.115

Tags: @product

4:21.572

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.567

And I create a file in the Persistent directory 0.066

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 4.102

And I plug USB drive "install" 2.487

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:43.656

Then the running Tails is installed on USB drive "install" 13.226

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.352

Hooks

After features/support/hooks.rb:291 2.466

After features/support/hooks.rb:75 0.119

Tags: @product

3:58.186

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.048

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.423

And I install Tails to USB drive "install" by cloning 3:29.826

Then the running Tails is installed on USB drive "install" 13.764

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.656

After features/support/hooks.rb:75 0.100

Tags: @product

3:57.983

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.011

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.568

And I have started Tails from DVD without network and logged in 8.357

And I clone USB drive "__internal" to a temporary USB drive "install" 1.110

And I plug USB drive "install" 2.426

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.167

Then the running Tails is installed on USB drive "install" 10.289

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.376

After features/support/hooks.rb:75 0.118

Tags: @product @uefi

1:34.725

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.924

And I power off the computer 0.316

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:20.431

Then Tails is running from USB drive "__internal" 0.283

And the boot device has safe access rights 2.689

And Tails has started in UEFI mode 0.053

Hooks

After features/support/hooks.rb:291 1.255

After features/support/hooks.rb:75 0.005

Tags: @product

1:34.341

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.283

And I plug and mount a USB drive containing a Tails USB image 26.936

And I create a 7200 MiB disk named "usbimage" 0.056

And I plug USB drive "usbimage" 2.359

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.705

Hooks

After features/support/hooks.rb:291 1.706

After features/support/hooks.rb:75 0.100

Tags: @product

1:19.281

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.155

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.066

Then Tails is running from USB drive "usbimage" 0.344

And the label of the system partition on "usbimage" is "Tails" 0.186

And the system partition on "usbimage" is an EFI system partition 0.136

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.156

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.081

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.074

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:291 0.847

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:37.203	Passed

Feature Report