Cucumber Reports (no 4723) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4723	18 Mar 2024, 12:10

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:56.015	Passed

Tags: @product @not_release_blocker

34.650

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.243

And I temporarily create a 4 GiB disk named "gptfat" 0.052

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.058

And I plug USB drive "gptfat" 2.503

When I start Tails Installer 19.729

Then I am told by Tails Installer that the destination device "is too small" 0.061

Hooks

After features/support/hooks.rb:291 0.972

After features/support/hooks.rb:75 0.001

Tags: @product

29.720

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.202

And I temporarily create a 7200 MiB disk named "temp" 0.042

And I start Tails Installer 18.385

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.735

Then the "temp" USB drive is selected 0.103

When I unplug USB drive "temp" 0.198

Then a suitable USB device is not found 0.031

Hooks

After features/support/hooks.rb:291 1.200

After features/support/hooks.rb:75 0.000

Tags: @product

4:26.348

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.220

And I temporarily create a 7200 MiB disk named "install" 0.111

And I create a gpt partition with a vfat filesystem on disk "install" 5.306

And I plug USB drive "install" 2.466

And I install Tails to USB drive "install" by cloning 3:57.862

Then the running Tails is installed on USB drive "install" 12.310

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.399

After features/support/hooks.rb:75 0.119

Tags: @product

3:48.283

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.342

And I temporarily create a 7200 MiB disk named "install" 0.068

And I plug USB drive "install" 2.488

And I install Tails to USB drive "install" by cloning 3:25.797

Then the running Tails is installed on USB drive "install" 11.532

But there is no persistence partition on USB drive "install" 0.052

Hooks

After features/support/hooks.rb:291 1.228

After features/support/hooks.rb:75 0.113

Tags: @product

4:31.080

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.298

And I create a file in the Persistent directory 0.164

And I temporarily create a 7200 MiB disk named "install" 0.058

And I create a gpt partition with a vfat filesystem on disk "install" 5.065

And I plug USB drive "install" 2.461

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:54.267

Then the running Tails is installed on USB drive "install" 13.804

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.882

Hooks

After features/support/hooks.rb:291 2.830

After features/support/hooks.rb:75 0.142

Tags: @product

4:8.440

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.394

And I temporarily create a 7200 MiB disk named "install" 0.071

And I plug USB drive "install" 2.468

And I install Tails to USB drive "install" by cloning 3:29.378

Then the running Tails is installed on USB drive "install" 20.015

And there is no persistence partition on USB drive "install" 0.110

Hooks

After features/support/hooks.rb:291 1.847

After features/support/hooks.rb:75 0.118

Tags: @product

4:14.623

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.211

And I have started Tails from DVD without network and logged in 8.827

And I clone USB drive "__internal" to a temporary USB drive "install" 1.437

And I plug USB drive "install" 2.527

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:27.065

Then the running Tails is installed on USB drive "install" 19.478

And there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 1.134

After features/support/hooks.rb:75 0.098

Tags: @product @uefi

1:42.934

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.022

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.132

Then Tails is running from USB drive "__internal" 0.324

And the boot device has safe access rights 3.064

And Tails has started in UEFI mode 0.047

Hooks

After features/support/hooks.rb:291 1.260

After features/support/hooks.rb:75 0.008

Tags: @product

1:39.024

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.001

Steps

Given I have started Tails from DVD without network and logged in 8.259

And I plug and mount a USB drive containing a Tails USB image 30.267

And I create a 7200 MiB disk named "usbimage" 0.042

And I plug USB drive "usbimage" 2.393

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 58.062

Hooks

After features/support/hooks.rb:291 2.041

After features/support/hooks.rb:75 0.091

Tags: @product

1:20.907

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.164

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:19.492

Then Tails is running from USB drive "usbimage" 0.380

And the label of the system partition on "usbimage" is "Tails" 0.243

And the system partition on "usbimage" is an EFI system partition 0.174

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.163

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.098

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.087

And the system partition on "usbimage" has the expected flags 0.102

Hooks

After features/support/hooks.rb:291 1.479

After features/support/hooks.rb:75 0.031

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:56.015	Passed

Feature Report