Cucumber Reports (no 4724) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4724	18 Mar 2024, 13:26

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:18.145	Passed

Tags: @product @not_release_blocker

23.155

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.964

And I temporarily create a 4 GiB disk named "gptfat" 0.041

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.963

And I plug USB drive "gptfat" 2.528

When I start Tails Installer 8.617

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 0.878

After features/support/hooks.rb:75 0.001

Tags: @product

20.859

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.202

And I temporarily create a 7200 MiB disk named "temp" 0.318

And I start Tails Installer 9.420

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.603

Then the "temp" USB drive is selected 0.082

When I unplug USB drive "temp" 0.180

Then a suitable USB device is not found 0.033

Hooks

After features/support/hooks.rb:291 1.163

After features/support/hooks.rb:75 0.000

Tags: @product

3:42.847

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.018

And I temporarily create a 7200 MiB disk named "install" 0.047

And I create a gpt partition with a vfat filesystem on disk "install" 4.018

And I plug USB drive "install" 2.496

And I install Tails to USB drive "install" by cloning 3:16.242

Then the running Tails is installed on USB drive "install" 11.965

But there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.136

After features/support/hooks.rb:75 0.129

Tags: @product

3:39.690

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.953

And I temporarily create a 7200 MiB disk named "install" 0.057

And I plug USB drive "install" 2.574

And I install Tails to USB drive "install" by cloning 3:17.722

Then the running Tails is installed on USB drive "install" 11.301

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.113

After features/support/hooks.rb:75 0.111

Tags: @product

4:16.550

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.487

And I create a file in the Persistent directory 0.063

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 4.084

And I plug USB drive "install" 2.457

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:38.646

Then the running Tails is installed on USB drive "install" 14.041

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 5.650

Hooks

After features/support/hooks.rb:291 2.752

After features/support/hooks.rb:75 0.120

Tags: @product

3:45.169

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.575

And I temporarily create a 7200 MiB disk named "install" 0.032

And I plug USB drive "install" 2.481

And I install Tails to USB drive "install" by cloning 3:17.789

Then the running Tails is installed on USB drive "install" 13.237

And there is no persistence partition on USB drive "install" 0.053

Hooks

After features/support/hooks.rb:291 1.221

After features/support/hooks.rb:75 0.132

Tags: @product

3:50.751

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.397

And I have started Tails from DVD without network and logged in 8.379

And I clone USB drive "__internal" to a temporary USB drive "install" 1.136

And I plug USB drive "install" 2.435

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.596

Then the running Tails is installed on USB drive "install" 11.727

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.179

After features/support/hooks.rb:75 0.120

Tags: @product @uefi

1:38.560

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.965

And I power off the computer 0.317

And the computer is set to boot in UEFI mode 0.022

When I start Tails from USB drive "__internal" with network unplugged and I login 1:23.007

Then Tails is running from USB drive "__internal" 0.364

And the boot device has safe access rights 2.834

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:291 0.564

After features/support/hooks.rb:75 0.094

Tags: @product

1:23.664

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.007

And I plug and mount a USB drive containing a Tails USB image 28.037

And I create a 7200 MiB disk named "usbimage" 0.035

And I plug USB drive "usbimage" 2.383

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.200

Hooks

After features/support/hooks.rb:291 1.968

After features/support/hooks.rb:75 0.085

Tags: @product

1:16.896

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.160

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:15.680

Then Tails is running from USB drive "usbimage" 0.349

And the label of the system partition on "usbimage" is "Tails" 0.186

And the system partition on "usbimage" is an EFI system partition 0.137

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.144

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.071

And the system partition on "usbimage" has the expected flags 0.078

Hooks

After features/support/hooks.rb:291 1.214

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:18.145	Passed

Feature Report