Cucumber Reports (no 4725) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4725	18 Mar 2024, 15:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:28.588	Passed

Tags: @product @not_release_blocker

22.850

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.991

And I temporarily create a 4 GiB disk named "gptfat" 0.054

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.010

And I plug USB drive "gptfat" 2.484

When I start Tails Installer 8.255

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.085

After features/support/hooks.rb:75 0.001

Tags: @product

19.279

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.041

And I temporarily create a 7200 MiB disk named "temp" 0.049

And I start Tails Installer 8.395

But a suitable USB device is not found 0.033

When I plug USB drive "temp" 2.472

Then the "temp" USB drive is selected 0.092

When I unplug USB drive "temp" 0.173

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.827

After features/support/hooks.rb:75 0.000

Tags: @product

3:44.254

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.323

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 5.174

And I plug USB drive "install" 2.678

And I install Tails to USB drive "install" by cloning 3:17.580

Then the running Tails is installed on USB drive "install" 10.395

But there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.421

After features/support/hooks.rb:75 0.108

Tags: @product

3:38.112

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.125

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.430

And I install Tails to USB drive "install" by cloning 3:16.679

Then the running Tails is installed on USB drive "install" 10.738

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.422

After features/support/hooks.rb:75 0.127

Tags: @product

4:22.850

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.977

And I create a file in the Persistent directory 0.127

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 4.169

And I plug USB drive "install" 2.980

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.202

Then the running Tails is installed on USB drive "install" 13.642

And there is a persistence partition on USB drive "install" 0.078

And the USB drive "install" contains the same files as my persistent storage 3.622

Hooks

After features/support/hooks.rb:291 2.431

After features/support/hooks.rb:75 0.121

Tags: @product

3:48.016

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.372

And I temporarily create a 7200 MiB disk named "install" 0.043

And I plug USB drive "install" 2.561

And I install Tails to USB drive "install" by cloning 3:19.075

Then the running Tails is installed on USB drive "install" 14.898

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.602

After features/support/hooks.rb:75 0.105

Tags: @product

3:47.780

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.546

And I have started Tails from DVD without network and logged in 8.581

And I clone USB drive "__internal" to a temporary USB drive "install" 1.183

And I plug USB drive "install" 2.472

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.623

Then the running Tails is installed on USB drive "install" 10.296

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.086

After features/support/hooks.rb:75 0.111

Tags: @product @uefi

1:40.676

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.723

And I power off the computer 0.320

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:26.029

Then Tails is running from USB drive "__internal" 0.338

And the boot device has safe access rights 3.191

And Tails has started in UEFI mode 0.045

Hooks

After features/support/hooks.rb:291 1.558

After features/support/hooks.rb:75 0.008

Tags: @product

1:24.196

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.212

And I plug and mount a USB drive containing a Tails USB image 28.088

And I create a 7200 MiB disk named "usbimage" 0.061

And I plug USB drive "usbimage" 2.388

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.445

Hooks

After features/support/hooks.rb:291 2.118

After features/support/hooks.rb:75 0.098

Tags: @product

1:20.573

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.189

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:19.359

Then Tails is running from USB drive "usbimage" 0.303

And the label of the system partition on "usbimage" is "Tails" 0.198

And the system partition on "usbimage" is an EFI system partition 0.157

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.124

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.068

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.092

Hooks

After features/support/hooks.rb:291 1.182

After features/support/hooks.rb:75 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:28.588	Passed

Feature Report