Cucumber Reports (no 4731) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4731	20 Mar 2024, 14:02

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:7.708	Passed

Tags: @product @not_release_blocker

26.020

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.733

And I temporarily create a 4 GiB disk named "gptfat" 0.068

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.055

And I plug USB drive "gptfat" 2.552

When I start Tails Installer 9.549

Then I am told by Tails Installer that the destination device "is too small" 0.061

Hooks

After features/support/hooks.rb:291 0.702

After features/support/hooks.rb:75 0.001

Tags: @product

19.867

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.453

And I temporarily create a 7200 MiB disk named "temp" 0.049

And I start Tails Installer 8.311

But a suitable USB device is not found 0.030

When I plug USB drive "temp" 2.638

Then the "temp" USB drive is selected 0.136

When I unplug USB drive "temp" 0.211

Then a suitable USB device is not found 0.035

Hooks

After features/support/hooks.rb:291 0.827

After features/support/hooks.rb:75 0.000

Tags: @product

3:43.316

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.280

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 5.239

And I plug USB drive "install" 2.509

And I install Tails to USB drive "install" by cloning 3:15.635

Then the running Tails is installed on USB drive "install" 11.528

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.092

After features/support/hooks.rb:75 0.126

Tags: @product

3:36.587

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.940

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.624

And I install Tails to USB drive "install" by cloning 3:14.671

Then the running Tails is installed on USB drive "install" 10.230

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.149

After features/support/hooks.rb:75 0.124

Tags: @product

4:28.860

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.742

And I create a file in the Persistent directory 0.127

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 4.384

And I plug USB drive "install" 2.491

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.067

Then the running Tails is installed on USB drive "install" 19.368

And there is a persistence partition on USB drive "install" 0.108

And the USB drive "install" contains the same files as my persistent storage 7.526

Hooks

After features/support/hooks.rb:291 2.478

After features/support/hooks.rb:75 0.124

Tags: @product

3:46.809

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.221

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.592

And I install Tails to USB drive "install" by cloning 3:16.316

Then the running Tails is installed on USB drive "install" 15.559

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.888

After features/support/hooks.rb:75 0.102

Tags: @product

3:54.041

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.010

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.146

And I have started Tails from DVD without network and logged in 10.113

And I clone USB drive "__internal" to a temporary USB drive "install" 1.178

And I plug USB drive "install" 3.676

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.980

Then the running Tails is installed on USB drive "install" 11.867

And there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.501

After features/support/hooks.rb:75 0.114

Tags: @product @uefi

1:49.184

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.567

And I power off the computer 0.324

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:33.695

Then Tails is running from USB drive "__internal" 0.418

And the boot device has safe access rights 3.093

And Tails has started in UEFI mode 0.061

Hooks

After features/support/hooks.rb:291 0.856

After features/support/hooks.rb:75 0.007

Tags: @product

1:32.783

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.339

And I plug and mount a USB drive containing a Tails USB image 30.841

And I create a 7200 MiB disk named "usbimage" 0.123

And I plug USB drive "usbimage" 2.392

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.085

Hooks

After features/support/hooks.rb:291 2.013

After features/support/hooks.rb:75 0.143

Tags: @product

1:30.236

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.202

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.877

Then Tails is running from USB drive "usbimage" 0.382

And the label of the system partition on "usbimage" is "Tails" 0.190

And the system partition on "usbimage" is an EFI system partition 0.149

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.153

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.083

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.084

And the system partition on "usbimage" has the expected flags 0.112

Hooks

After features/support/hooks.rb:291 0.572

After features/support/hooks.rb:75 0.015

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:7.708	Passed

Feature Report