Cucumber Reports (no 4747) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4747	27 Mar 2024, 12:14

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:40.450	Passed

Tags: @product @not_release_blocker

25.753

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.215

And I temporarily create a 4 GiB disk named "gptfat" 0.065

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.715

And I plug USB drive "gptfat" 2.499

When I start Tails Installer 8.202

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.404

After features/support/hooks.rb:75 0.000

Tags: @product

21.562

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.713

And I temporarily create a 7200 MiB disk named "temp" 0.614

And I start Tails Installer 8.335

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.550

Then the "temp" USB drive is selected 0.092

When I unplug USB drive "temp" 0.213

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.739

After features/support/hooks.rb:75 0.000

Tags: @product

3:52.320

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.283

And I temporarily create a 7200 MiB disk named "install" 0.080

And I create a gpt partition with a vfat filesystem on disk "install" 6.746

And I plug USB drive "install" 2.463

And I install Tails to USB drive "install" by cloning 3:23.614

Then the running Tails is installed on USB drive "install" 11.044

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:291 1.379

After features/support/hooks.rb:75 0.118

Tags: @product

3:38.390

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.423

And I temporarily create a 7200 MiB disk named "install" 0.193

And I plug USB drive "install" 3.650

And I install Tails to USB drive "install" by cloning 3:15.624

Then the running Tails is installed on USB drive "install" 10.427

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.268

After features/support/hooks.rb:75 0.112

Tags: @product

4:17.241

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.019

And I create a file in the Persistent directory 0.069

And I temporarily create a 7200 MiB disk named "install" 0.054

And I create a gpt partition with a vfat filesystem on disk "install" 5.261

And I plug USB drive "install" 2.540

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.385

Then the running Tails is installed on USB drive "install" 12.704

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.139

Hooks

After features/support/hooks.rb:291 1.833

After features/support/hooks.rb:75 0.125

Tags: @product

3:45.732

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.710

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.464

And I install Tails to USB drive "install" by cloning 3:18.299

Then the running Tails is installed on USB drive "install" 13.120

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.860

After features/support/hooks.rb:75 0.110

Tags: @product

3:49.615

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.181

And I have started Tails from DVD without network and logged in 8.779

And I clone USB drive "__internal" to a temporary USB drive "install" 1.247

And I plug USB drive "install" 2.787

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.924

Then the running Tails is installed on USB drive "install" 11.588

And there is no persistence partition on USB drive "install" 0.106

Hooks

After features/support/hooks.rb:291 1.345

After features/support/hooks.rb:75 0.130

Tags: @product @uefi

1:42.688

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.379

And I power off the computer 0.349

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.702

Then Tails is running from USB drive "__internal" 0.337

And the boot device has safe access rights 2.839

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 1.348

After features/support/hooks.rb:75 0.006

Tags: @product

1:28.214

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.490

And I plug and mount a USB drive containing a Tails USB image 31.477

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.411

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.792

Hooks

After features/support/hooks.rb:291 1.766

After features/support/hooks.rb:75 0.092

Tags: @product

1:18.932

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.191

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:17.574

Then Tails is running from USB drive "usbimage" 0.308

And the label of the system partition on "usbimage" is "Tails" 0.199

And the system partition on "usbimage" is an EFI system partition 0.170

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.148

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.151

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.093

And the system partition on "usbimage" has the expected flags 0.093

Hooks

After features/support/hooks.rb:291 0.663

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:40.450	Passed

Feature Report