Cucumber Reports (no 4754) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4754	28 Mar 2024, 11:54

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:36.138	Passed

Tags: @product @not_release_blocker

23.051

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.063

And I temporarily create a 4 GiB disk named "gptfat" 0.056

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.030

And I plug USB drive "gptfat" 2.404

When I start Tails Installer 8.443

Then I am told by Tails Installer that the destination device "is too small" 0.052

Hooks

After features/support/hooks.rb:291 1.517

After features/support/hooks.rb:75 0.001

Tags: @product

19.487

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.064

And I temporarily create a 7200 MiB disk named "temp" 0.030

And I start Tails Installer 8.602

But a suitable USB device is not found 0.018

When I plug USB drive "temp" 2.457

Then the "temp" USB drive is selected 0.075

When I unplug USB drive "temp" 0.219

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 1.162

After features/support/hooks.rb:75 0.000

Tags: @product

3:50.283

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.910

And I temporarily create a 7200 MiB disk named "install" 0.031

And I create a gpt partition with a vfat filesystem on disk "install" 5.058

And I plug USB drive "install" 2.513

And I install Tails to USB drive "install" by cloning 3:22.733

Then the running Tails is installed on USB drive "install" 11.963

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.233

After features/support/hooks.rb:75 0.126

Tags: @product

3:43.192

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.459

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 2.579

And I install Tails to USB drive "install" by cloning 3:20.047

Then the running Tails is installed on USB drive "install" 11.992

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.077

After features/support/hooks.rb:75 0.113

Tags: @product

4:17.594

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.187

And I create a file in the Persistent directory 0.077

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 5.120

And I plug USB drive "install" 2.611

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.047

Then the running Tails is installed on USB drive "install" 12.826

And there is a persistence partition on USB drive "install" 0.064

And the USB drive "install" contains the same files as my persistent storage 3.614

Hooks

After features/support/hooks.rb:291 2.293

After features/support/hooks.rb:75 0.131

Tags: @product

3:46.342

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.515

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.432

And I install Tails to USB drive "install" by cloning 3:17.067

Then the running Tails is installed on USB drive "install" 15.180

And there is no persistence partition on USB drive "install" 0.104

Hooks

After features/support/hooks.rb:291 2.673

After features/support/hooks.rb:75 0.100

Tags: @product

3:54.624

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.189

And I have started Tails from DVD without network and logged in 9.468

And I clone USB drive "__internal" to a temporary USB drive "install" 1.191

And I plug USB drive "install" 2.693

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.549

Then the running Tails is installed on USB drive "install" 12.474

And there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.536

After features/support/hooks.rb:75 0.088

Tags: @product @uefi

1:41.065

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.937

And I power off the computer 0.328

And the computer is set to boot in UEFI mode 0.064

When I start Tails from USB drive "__internal" with network unplugged and I login 1:26.388

Then Tails is running from USB drive "__internal" 0.354

And the boot device has safe access rights 2.939

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:291 0.618

After features/support/hooks.rb:75 0.035

Tags: @product

1:21.594

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.068

And I plug and mount a USB drive containing a Tails USB image 28.714

And I create a 7200 MiB disk named "usbimage" 0.046

And I plug USB drive "usbimage" 2.392

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 42.371

Hooks

After features/support/hooks.rb:291 1.662

After features/support/hooks.rb:75 0.088

Tags: @product

1:18.902

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.132

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:17.742

Then Tails is running from USB drive "usbimage" 0.291

And the label of the system partition on "usbimage" is "Tails" 0.195

And the system partition on "usbimage" is an EFI system partition 0.176

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.130

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.075

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.078

Hooks

After features/support/hooks.rb:291 0.870

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:36.138	Passed

Feature Report