Cucumber Reports (no 4759) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4759	31 Mar 2024, 11:54

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:30.216	Passed

Tags: @product @not_release_blocker

24.780

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.444

And I temporarily create a 4 GiB disk named "gptfat" 0.148

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.222

And I plug USB drive "gptfat" 2.504

When I start Tails Installer 8.420

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 1.009

After features/support/hooks.rb:75 0.001

Tags: @product

24.445

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.611

And I temporarily create a 7200 MiB disk named "temp" 0.035

And I start Tails Installer 12.870

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.605

Then the "temp" USB drive is selected 0.109

When I unplug USB drive "temp" 0.175

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.713

After features/support/hooks.rb:75 0.000

Tags: @product

3:41.698

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.874

And I temporarily create a 7200 MiB disk named "install" 0.034

And I create a gpt partition with a vfat filesystem on disk "install" 5.265

And I plug USB drive "install" 2.484

And I install Tails to USB drive "install" by cloning 3:16.276

Then the running Tails is installed on USB drive "install" 9.694

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.458

After features/support/hooks.rb:75 0.110

Tags: @product

3:59.451

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.927

And I temporarily create a 7200 MiB disk named "install" 0.037

And I plug USB drive "install" 2.465

And I install Tails to USB drive "install" by cloning 3:39.256

Then the running Tails is installed on USB drive "install" 9.690

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.323

After features/support/hooks.rb:75 0.109

Tags: @product

4:4.456

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.728

And I create a file in the Persistent directory 0.074

And I temporarily create a 7200 MiB disk named "install" 0.029

And I create a gpt partition with a vfat filesystem on disk "install" 4.030

And I plug USB drive "install" 2.607

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:30.501

Then the running Tails is installed on USB drive "install" 13.299

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 3.119

Hooks

After features/support/hooks.rb:291 2.145

After features/support/hooks.rb:75 0.118

Tags: @product

3:49.158

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.778

And I temporarily create a 7200 MiB disk named "install" 0.034

And I plug USB drive "install" 2.452

And I install Tails to USB drive "install" by cloning 3:19.499

Then the running Tails is installed on USB drive "install" 16.325

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.874

After features/support/hooks.rb:75 0.095

Tags: @product

3:50.934

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.009

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.064

And I have started Tails from DVD without network and logged in 8.498

And I clone USB drive "__internal" to a temporary USB drive "install" 1.156

And I plug USB drive "install" 2.543

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.270

Then the running Tails is installed on USB drive "install" 11.345

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.449

After features/support/hooks.rb:75 0.100

Tags: @product @uefi

1:36.397

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.030

And I power off the computer 0.323

And the computer is set to boot in UEFI mode 0.022

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.914

Then Tails is running from USB drive "__internal" 0.303

And the boot device has safe access rights 2.760

And Tails has started in UEFI mode 0.041

Hooks

After features/support/hooks.rb:291 1.272

After features/support/hooks.rb:75 0.008

Tags: @product

1:21.052

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.979

And I plug and mount a USB drive containing a Tails USB image 29.418

And I create a 7200 MiB disk named "usbimage" 0.034

And I plug USB drive "usbimage" 2.387

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 41.232

Hooks

After features/support/hooks.rb:291 1.109

After features/support/hooks.rb:75 0.089

Tags: @product

1:17.840

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.138

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.697

Then Tails is running from USB drive "usbimage" 0.288

And the label of the system partition on "usbimage" is "Tails" 0.189

And the system partition on "usbimage" is an EFI system partition 0.147

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.146

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.080

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.075

And the system partition on "usbimage" has the expected flags 0.077

Hooks

After features/support/hooks.rb:291 0.886

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:30.216	Passed

Feature Report