Cucumber Reports (no 4763) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4763	02 Apr 2024, 23:14

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:50.203	Passed

Tags: @product @not_release_blocker

23.746

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.976

And I temporarily create a 4 GiB disk named "gptfat" 0.054

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.066

And I plug USB drive "gptfat" 2.476

When I start Tails Installer 8.131

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 0.656

After features/support/hooks.rb:75 0.001

Tags: @product

18.987

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.953

And I temporarily create a 7200 MiB disk named "temp" 0.046

And I start Tails Installer 8.229

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.451

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.182

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 1.001

After features/support/hooks.rb:75 0.000

Tags: @product

3:45.247

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.060

And I temporarily create a 7200 MiB disk named "install" 0.064

And I create a gpt partition with a vfat filesystem on disk "install" 4.238

And I plug USB drive "install" 2.494

And I install Tails to USB drive "install" by cloning 3:17.587

Then the running Tails is installed on USB drive "install" 12.742

But there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.293

After features/support/hooks.rb:75 0.111

Tags: @product

3:37.301

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.249

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.415

And I install Tails to USB drive "install" by cloning 3:16.923

Then the running Tails is installed on USB drive "install" 9.603

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.239

After features/support/hooks.rb:75 0.110

Tags: @product

4:12.433

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.451

And I create a file in the Persistent directory 0.166

And I temporarily create a 7200 MiB disk named "install" 0.056

And I create a gpt partition with a vfat filesystem on disk "install" 4.135

And I plug USB drive "install" 2.496

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.250

Then the running Tails is installed on USB drive "install" 11.830

And there is a persistence partition on USB drive "install" 0.051

And the USB drive "install" contains the same files as my persistent storage 2.994

Hooks

After features/support/hooks.rb:291 1.882

After features/support/hooks.rb:75 0.118

Tags: @product

3:44.264

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.183

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.559

And I install Tails to USB drive "install" by cloning 3:17.616

Then the running Tails is installed on USB drive "install" 13.771

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.748

After features/support/hooks.rb:75 0.110

Tags: @product

3:47.933

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.488

And I have started Tails from DVD without network and logged in 8.472

And I clone USB drive "__internal" to a temporary USB drive "install" 1.015

And I plug USB drive "install" 2.636

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.950

Then the running Tails is installed on USB drive "install" 10.298

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.088

After features/support/hooks.rb:75 0.136

Tags: @product @uefi

1:43.361

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.605

And I power off the computer 0.336

And the computer is set to boot in UEFI mode 0.087

When I start Tails from USB drive "__internal" with network unplugged and I login 1:24.865

Then Tails is running from USB drive "__internal" 0.311

And the boot device has safe access rights 3.083

And Tails has started in UEFI mode 0.070

Hooks

After features/support/hooks.rb:291 0.635

After features/support/hooks.rb:75 0.063

Tags: @product

1:54.970

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.201

And I plug and mount a USB drive containing a Tails USB image 38.918

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.395

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:3.412

Hooks

After features/support/hooks.rb:291 2.741

After features/support/hooks.rb:75 0.096

Tags: @product

1:21.957

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.158

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:20.731

Then Tails is running from USB drive "usbimage" 0.344

And the label of the system partition on "usbimage" is "Tails" 0.200

And the system partition on "usbimage" is an EFI system partition 0.152

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.123

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.079

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:291 1.532

After features/support/hooks.rb:75 0.009

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:50.203	Passed

Feature Report