Cucumber Reports (no 4764) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4764	03 Apr 2024, 12:01

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:59.045	Passed

Tags: @product @not_release_blocker

24.650

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.135

And I temporarily create a 4 GiB disk named "gptfat" 0.164

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.496

And I plug USB drive "gptfat" 2.453

When I start Tails Installer 8.355

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 1.075

After features/support/hooks.rb:75 0.001

Tags: @product

20.678

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.357

And I temporarily create a 7200 MiB disk named "temp" 0.062

And I start Tails Installer 8.346

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.532

Then the "temp" USB drive is selected 0.118

When I unplug USB drive "temp" 0.211

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 1.350

After features/support/hooks.rb:75 0.000

Tags: @product

3:46.573

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.917

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 5.186

And I plug USB drive "install" 2.541

And I install Tails to USB drive "install" by cloning 3:16.770

Then the running Tails is installed on USB drive "install" 13.043

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.550

After features/support/hooks.rb:75 0.112

Tags: @product

3:58.739

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.300

And I temporarily create a 7200 MiB disk named "install" 0.082

And I plug USB drive "install" 2.747

And I install Tails to USB drive "install" by cloning 3:37.343

Then the running Tails is installed on USB drive "install" 10.196

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.275

After features/support/hooks.rb:75 0.111

Tags: @product

5:10.777

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 50.211

And I create a file in the Persistent directory 0.092

And I temporarily create a 7200 MiB disk named "install" 1.005

And I create a gpt partition with a vfat filesystem on disk "install" 8.177

And I plug USB drive "install" 4.773

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:46.492

Then the running Tails is installed on USB drive "install" 15.200

And there is a persistence partition on USB drive "install" 0.083

And the USB drive "install" contains the same files as my persistent storage 4.740

Hooks

After features/support/hooks.rb:291 2.416

After features/support/hooks.rb:75 0.135

Tags: @product

3:51.901

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.237

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.550

And I install Tails to USB drive "install" by cloning 3:17.170

Then the running Tails is installed on USB drive "install" 18.805

And there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:291 1.872

After features/support/hooks.rb:75 0.095

Tags: @product

3:51.289

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.493

And I have started Tails from DVD without network and logged in 9.043

And I clone USB drive "__internal" to a temporary USB drive "install" 1.168

And I plug USB drive "install" 2.640

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:16.804

Then the running Tails is installed on USB drive "install" 12.071

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.229

After features/support/hooks.rb:75 0.138

Tags: @product @uefi

1:45.813

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.737

And I power off the computer 0.346

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:29.252

Then Tails is running from USB drive "__internal" 0.336

And the boot device has safe access rights 3.058

And Tails has started in UEFI mode 0.053

Hooks

After features/support/hooks.rb:291 0.586

After features/support/hooks.rb:75 0.006

Tags: @product

1:27.961

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.391

And I plug and mount a USB drive containing a Tails USB image 30.611

And I create a 7200 MiB disk named "usbimage" 0.054

And I plug USB drive "usbimage" 2.408

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 46.495

Hooks

After features/support/hooks.rb:291 1.913

After features/support/hooks.rb:75 0.105

Tags: @product

1:20.659

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.228

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:19.384

Then Tails is running from USB drive "usbimage" 0.333

And the label of the system partition on "usbimage" is "Tails" 0.191

And the system partition on "usbimage" is an EFI system partition 0.144

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.143

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.077

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.077

Hooks

After features/support/hooks.rb:291 1.150

After features/support/hooks.rb:75 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:59.045	Passed

Feature Report