Cucumber Reports (no 4765) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4765	03 Apr 2024, 17:57

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:27.960	Passed

Tags: @product @not_release_blocker

24.372

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.507

And I temporarily create a 4 GiB disk named "gptfat" 0.061

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.042

And I plug USB drive "gptfat" 2.581

When I start Tails Installer 8.115

Then I am told by Tails Installer that the destination device "is too small" 0.063

Hooks

After features/support/hooks.rb:291 0.740

After features/support/hooks.rb:75 0.001

Tags: @product

19.348

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.026

And I temporarily create a 7200 MiB disk named "temp" 0.070

And I start Tails Installer 8.321

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.548

Then the "temp" USB drive is selected 0.120

When I unplug USB drive "temp" 0.212

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 0.831

After features/support/hooks.rb:75 0.000

Tags: @product

3:46.089

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.281

And I temporarily create a 7200 MiB disk named "install" 0.039

And I create a gpt partition with a vfat filesystem on disk "install" 4.107

And I plug USB drive "install" 2.497

And I install Tails to USB drive "install" by cloning 3:19.731

Then the running Tails is installed on USB drive "install" 11.354

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.148

After features/support/hooks.rb:75 0.114

Tags: @product

3:38.626

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.100

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.571

And I install Tails to USB drive "install" by cloning 3:17.409

Then the running Tails is installed on USB drive "install" 10.424

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.204

After features/support/hooks.rb:75 0.113

Tags: @product

4:16.949

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.175

And I create a file in the Persistent directory 0.113

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.207

And I plug USB drive "install" 2.431

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.120

Then the running Tails is installed on USB drive "install" 12.837

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 4.952

Hooks

After features/support/hooks.rb:291 3.512

After features/support/hooks.rb:75 0.183

Tags: @product

3:48.080

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.244

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.446

And I install Tails to USB drive "install" by cloning 3:17.143

Then the running Tails is installed on USB drive "install" 14.140

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.664

After features/support/hooks.rb:75 0.098

Tags: @product

3:48.282

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.342

And I have started Tails from DVD without network and logged in 8.472

And I clone USB drive "__internal" to a temporary USB drive "install" 1.168

And I plug USB drive "install" 2.629

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.639

Then the running Tails is installed on USB drive "install" 10.966

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.217

After features/support/hooks.rb:75 0.136

Tags: @product @uefi

1:44.609

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.550

And I power off the computer 0.322

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:29.017

Then Tails is running from USB drive "__internal" 0.373

And the boot device has safe access rights 3.254

And Tails has started in UEFI mode 0.065

Hooks

After features/support/hooks.rb:291 1.011

After features/support/hooks.rb:75 0.006

Tags: @product

1:24.333

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.332

And I plug and mount a USB drive containing a Tails USB image 28.224

And I create a 7200 MiB disk named "usbimage" 0.042

And I plug USB drive "usbimage" 2.365

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.368

Hooks

After features/support/hooks.rb:291 1.944

After features/support/hooks.rb:75 0.090

Tags: @product

1:17.268

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.010

Steps

Given a computer 0.167

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.059

Then Tails is running from USB drive "usbimage" 0.303

And the label of the system partition on "usbimage" is "Tails" 0.192

And the system partition on "usbimage" is an EFI system partition 0.153

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.166

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.071

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.072

And the system partition on "usbimage" has the expected flags 0.081

Hooks

After features/support/hooks.rb:291 0.652

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:27.960	Passed

Feature Report