Cucumber Reports (no 4778) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4778	08 Apr 2024, 12:01

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:48.595	Passed

Tags: @product @not_release_blocker

24.043

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.182

And I temporarily create a 4 GiB disk named "gptfat" 0.066

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.102

And I plug USB drive "gptfat" 2.544

When I start Tails Installer 8.104

Then I am told by Tails Installer that the destination device "is too small" 0.042

Hooks

After features/support/hooks.rb:305 0.696

After features/support/hooks.rb:89 0.000

Tags: @product

19.726

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.188

And I temporarily create a 7200 MiB disk named "temp" 0.071

And I start Tails Installer 8.449

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.434

Then the "temp" USB drive is selected 0.101

When I unplug USB drive "temp" 0.362

Then a suitable USB device is not found 0.095

Hooks

After features/support/hooks.rb:305 1.498

After features/support/hooks.rb:89 0.000

Tags: @product

3:51.800

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.033

And I temporarily create a 7200 MiB disk named "install" 0.068

And I create a gpt partition with a vfat filesystem on disk "install" 5.243

And I plug USB drive "install" 2.566

And I install Tails to USB drive "install" by cloning 3:20.092

Then the running Tails is installed on USB drive "install" 15.702

But there is no persistence partition on USB drive "install" 0.094

Hooks

After features/support/hooks.rb:305 1.622

After features/support/hooks.rb:89 0.124

Tags: @product

4:1.030

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.364

And I temporarily create a 7200 MiB disk named "install" 0.057

And I plug USB drive "install" 2.443

And I install Tails to USB drive "install" by cloning 3:39.157

Then the running Tails is installed on USB drive "install" 10.934

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:305 1.092

After features/support/hooks.rb:89 0.115

Tags: @product

4:55.455

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 52.740

And I create a file in the Persistent directory 0.062

And I temporarily create a 7200 MiB disk named "install" 0.068

And I create a gpt partition with a vfat filesystem on disk "install" 4.128

And I plug USB drive "install" 2.454

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.806

Then the running Tails is installed on USB drive "install" 13.060

And there is a persistence partition on USB drive "install" 0.059

And the USB drive "install" contains the same files as my persistent storage 3.074

Hooks

After features/support/hooks.rb:305 2.209

After features/support/hooks.rb:89 0.131

Tags: @product

3:46.210

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.670

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 3.033

And I install Tails to USB drive "install" by cloning 3:15.665

Then the running Tails is installed on USB drive "install" 14.733

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:305 1.796

After features/support/hooks.rb:89 0.093

Tags: @product

3:47.047

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.370

And I have started Tails from DVD without network and logged in 8.939

And I clone USB drive "__internal" to a temporary USB drive "install" 1.205

And I plug USB drive "install" 2.484

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.039

Then the running Tails is installed on USB drive "install" 10.924

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:305 1.424

After features/support/hooks.rb:89 0.125

Tags: @product @uefi

1:47.194

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.151

And I power off the computer 0.519

And the computer is set to boot in UEFI mode 0.221

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.450

Then Tails is running from USB drive "__internal" 0.372

And the boot device has safe access rights 3.418

And Tails has started in UEFI mode 0.060

Hooks

After features/support/hooks.rb:305 0.801

After features/support/hooks.rb:89 0.006

Tags: @product

1:28.617

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.356

And I plug and mount a USB drive containing a Tails USB image 31.999

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.407

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.812

Hooks

After features/support/hooks.rb:305 1.965

After features/support/hooks.rb:89 0.093

Tags: @product

1:27.469

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given a computer 0.176

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:26.122

Then Tails is running from USB drive "usbimage" 0.342

And the label of the system partition on "usbimage" is "Tails" 0.223

And the system partition on "usbimage" is an EFI system partition 0.176

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.158

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.106

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.079

And the system partition on "usbimage" has the expected flags 0.083

Hooks

After features/support/hooks.rb:305 0.609

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:48.595	Passed

Feature Report