Cucumber Reports (no 4786) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4786	13 Apr 2024, 11:49

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:7.622	Passed

Tags: @product @not_release_blocker

22.530

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.877

And I temporarily create a 4 GiB disk named "gptfat" 0.040

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.060

And I plug USB drive "gptfat" 2.514

When I start Tails Installer 7.993

Then I am told by Tails Installer that the destination device "is too small" 0.043

Hooks

After features/support/hooks.rb:305 0.660

After features/support/hooks.rb:89 0.000

Tags: @product

18.526

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.827

And I temporarily create a 7200 MiB disk named "temp" 0.060

And I start Tails Installer 7.929

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.418

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.172

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:305 0.700

After features/support/hooks.rb:89 0.000

Tags: @product

3:41.849

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.027

And I temporarily create a 7200 MiB disk named "install" 0.054

And I create a gpt partition with a vfat filesystem on disk "install" 4.109

And I plug USB drive "install" 2.482

And I install Tails to USB drive "install" by cloning 3:17.030

Then the running Tails is installed on USB drive "install" 10.068

But there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:305 1.159

After features/support/hooks.rb:89 0.112

Tags: @product

3:35.935

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.962

And I temporarily create a 7200 MiB disk named "install" 0.061

And I plug USB drive "install" 2.410

And I install Tails to USB drive "install" by cloning 3:14.826

Then the running Tails is installed on USB drive "install" 10.614

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:305 1.099

After features/support/hooks.rb:89 0.111

Tags: @product

4:11.330

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.848

And I create a file in the Persistent directory 0.058

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.071

And I plug USB drive "install" 2.536

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.123

Then the running Tails is installed on USB drive "install" 11.945

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 2.628

Hooks

After features/support/hooks.rb:305 2.036

After features/support/hooks.rb:89 0.131

Tags: @product

3:45.010

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.409

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.482

And I install Tails to USB drive "install" by cloning 3:17.375

Then the running Tails is installed on USB drive "install" 12.633

And there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:305 1.306

After features/support/hooks.rb:89 0.090

Tags: @product

3:50.856

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.050

And I have started Tails from DVD without network and logged in 8.400

And I clone USB drive "__internal" to a temporary USB drive "install" 1.010

And I plug USB drive "install" 2.415

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:19.807

Then the running Tails is installed on USB drive "install" 10.118

And there is no persistence partition on USB drive "install" 0.053

Hooks

After features/support/hooks.rb:305 1.042

After features/support/hooks.rb:89 0.113

Tags: @product @uefi

1:40.250

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.491

And I power off the computer 0.325

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:26.370

Then Tails is running from USB drive "__internal" 0.273

And the boot device has safe access rights 2.698

And Tails has started in UEFI mode 0.066

Hooks

After features/support/hooks.rb:305 0.535

After features/support/hooks.rb:89 0.041

Tags: @product

1:23.357

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.963

And I plug and mount a USB drive containing a Tails USB image 30.505

And I create a 7200 MiB disk named "usbimage" 0.040

And I plug USB drive "usbimage" 2.405

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 42.442

Hooks

After features/support/hooks.rb:305 1.948

After features/support/hooks.rb:89 0.095

Tags: @product

1:17.975

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.155

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.840

Then Tails is running from USB drive "usbimage" 0.284

And the label of the system partition on "usbimage" is "Tails" 0.213

And the system partition on "usbimage" is an EFI system partition 0.131

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.137

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.066

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.073

And the system partition on "usbimage" has the expected flags 0.072

Hooks

After features/support/hooks.rb:305 0.731

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:7.622	Passed

Feature Report