Cucumber Reports (no 4789) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4789	16 Apr 2024, 12:04

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:42.716	Passed

Tags: @product @not_release_blocker

23.455

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.590

And I temporarily create a 4 GiB disk named "gptfat" 0.063

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.991

And I plug USB drive "gptfat" 2.571

When I start Tails Installer 8.192

Then I am told by Tails Installer that the destination device "is too small" 0.045

Hooks

After features/support/hooks.rb:305 0.682

After features/support/hooks.rb:89 0.001

Tags: @product

19.216

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.077

And I temporarily create a 7200 MiB disk named "temp" 0.065

And I start Tails Installer 8.312

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.461

Then the "temp" USB drive is selected 0.085

When I unplug USB drive "temp" 0.173

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:305 0.680

After features/support/hooks.rb:89 0.000

Tags: @product

3:39.856

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.970

And I temporarily create a 7200 MiB disk named "install" 0.079

And I create a gpt partition with a vfat filesystem on disk "install" 4.092

And I plug USB drive "install" 2.426

And I install Tails to USB drive "install" by cloning 3:14.619

Then the running Tails is installed on USB drive "install" 10.603

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:305 1.200

After features/support/hooks.rb:89 0.111

Tags: @product

3:35.581

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.048

And I temporarily create a 7200 MiB disk named "install" 0.040

And I plug USB drive "install" 2.567

And I install Tails to USB drive "install" by cloning 3:14.425

Then the running Tails is installed on USB drive "install" 10.423

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:305 1.480

After features/support/hooks.rb:89 0.118

Tags: @product

4:15.260

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.817

And I create a file in the Persistent directory 0.096

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 5.133

And I plug USB drive "install" 2.529

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.208

Then the running Tails is installed on USB drive "install" 12.587

And there is a persistence partition on USB drive "install" 0.081

And the USB drive "install" contains the same files as my persistent storage 3.753

Hooks

After features/support/hooks.rb:305 1.980

After features/support/hooks.rb:89 0.126

Tags: @product

3:47.042

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.949

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.499

And I install Tails to USB drive "install" by cloning 3:20.116

Then the running Tails is installed on USB drive "install" 13.348

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.690

After features/support/hooks.rb:89 0.104

Tags: @product

4:15.766

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.285

And I have started Tails from DVD without network and logged in 9.265

And I clone USB drive "__internal" to a temporary USB drive "install" 1.061

And I plug USB drive "install" 2.487

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:37.785

Then the running Tails is installed on USB drive "install" 15.806

And there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:305 1.990

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

1:41.386

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.927

And I power off the computer 0.333

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:26.820

Then Tails is running from USB drive "__internal" 0.313

And the boot device has safe access rights 2.913

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:305 0.645

After features/support/hooks.rb:89 0.005

Tags: @product

1:25.360

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.599

And I plug and mount a USB drive containing a Tails USB image 29.451

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.393

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.872

Hooks

After features/support/hooks.rb:305 2.335

After features/support/hooks.rb:89 0.107

Tags: @product

1:19.789

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.179

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.623

Then Tails is running from USB drive "usbimage" 0.304

And the label of the system partition on "usbimage" is "Tails" 0.176

And the system partition on "usbimage" is an EFI system partition 0.145

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.126

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.065

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.084

And the system partition on "usbimage" has the expected flags 0.084

Hooks

After features/support/hooks.rb:305 0.689

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:42.716	Passed

Feature Report