Cucumber Reports (no 4790) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4790	16 Apr 2024, 20:06

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:10.175	Passed

Tags: @product @not_release_blocker

24.973

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.256

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.123

And I plug USB drive "gptfat" 2.506

When I start Tails Installer 8.983

Then I am told by Tails Installer that the destination device "is too small" 0.053

Hooks

After features/support/hooks.rb:305 0.854

After features/support/hooks.rb:89 0.001

Tags: @product

19.977

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.375

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 8.731

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.478

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.204

Then a suitable USB device is not found 0.028

Hooks

After features/support/hooks.rb:305 0.762

After features/support/hooks.rb:89 0.000

Tags: @product

3:40.850

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.177

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 5.106

And I plug USB drive "install" 2.491

And I install Tails to USB drive "install" by cloning 3:14.909

Then the running Tails is installed on USB drive "install" 10.041

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:305 1.309

After features/support/hooks.rb:89 0.122

Tags: @product

3:42.706

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.054

And I temporarily create a 7200 MiB disk named "install" 0.071

And I plug USB drive "install" 2.487

And I install Tails to USB drive "install" by cloning 3:17.324

Then the running Tails is installed on USB drive "install" 14.699

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.720

After features/support/hooks.rb:89 0.118

Tags: @product

4:15.384

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.437

And I create a file in the Persistent directory 0.082

And I temporarily create a 7200 MiB disk named "install" 0.067

And I create a gpt partition with a vfat filesystem on disk "install" 4.201

And I plug USB drive "install" 2.399

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.884

Then the running Tails is installed on USB drive "install" 12.779

And there is a persistence partition on USB drive "install" 0.090

And the USB drive "install" contains the same files as my persistent storage 3.442

Hooks

After features/support/hooks.rb:305 1.999

After features/support/hooks.rb:89 0.122

Tags: @product

3:49.375

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.129

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.532

And I install Tails to USB drive "install" by cloning 3:20.052

Then the running Tails is installed on USB drive "install" 16.532

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:305 2.155

After features/support/hooks.rb:89 0.101

Tags: @product

3:54.091

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.156

And I have started Tails from DVD without network and logged in 9.403

And I clone USB drive "__internal" to a temporary USB drive "install" 1.909

And I plug USB drive "install" 2.619

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:16.379

Then the running Tails is installed on USB drive "install" 13.551

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:305 1.530

After features/support/hooks.rb:89 0.133

Tags: @product @uefi

2:3.751

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 20.267

And I power off the computer 0.336

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:39.674

Then Tails is running from USB drive "__internal" 0.337

And the boot device has safe access rights 3.060

And Tails has started in UEFI mode 0.049

Hooks

After features/support/hooks.rb:305 0.634

After features/support/hooks.rb:89 0.006

Tags: @product

1:37.673

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.582

And I plug and mount a USB drive containing a Tails USB image 34.122

And I create a 7200 MiB disk named "usbimage" 0.053

And I plug USB drive "usbimage" 2.459

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.455

Hooks

After features/support/hooks.rb:305 2.329

After features/support/hooks.rb:89 0.113

Tags: @product

1:21.391

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given a computer 0.180

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:20.179

Then Tails is running from USB drive "usbimage" 0.308

And the label of the system partition on "usbimage" is "Tails" 0.208

And the system partition on "usbimage" is an EFI system partition 0.147

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.146

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.079

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.072

And the system partition on "usbimage" has the expected flags 0.069

Hooks

After features/support/hooks.rb:305 0.701

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:10.175	Passed

Feature Report