Cucumber Reports (no 4821) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4821	01 May 2024, 13:54

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:1.503	Passed

Tags: @product @not_release_blocker

25.951

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.311

And I temporarily create a 4 GiB disk named "gptfat" 0.051

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.292

And I plug USB drive "gptfat" 2.501

When I start Tails Installer 8.738

Then I am told by Tails Installer that the destination device "is too small" 0.056

Hooks

After features/support/hooks.rb:305 0.817

After features/support/hooks.rb:89 0.001

Tags: @product

21.580

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.805

And I temporarily create a 7200 MiB disk named "temp" 0.045

And I start Tails Installer 9.149

But a suitable USB device is not found 0.033

When I plug USB drive "temp" 3.250

Then the "temp" USB drive is selected 0.089

When I unplug USB drive "temp" 0.182

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:305 0.777

After features/support/hooks.rb:89 0.000

Tags: @product

3:55.054

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.316

And I temporarily create a 7200 MiB disk named "install" 0.065

And I create a gpt partition with a vfat filesystem on disk "install" 6.517

And I plug USB drive "install" 2.539

And I install Tails to USB drive "install" by cloning 3:19.409

Then the running Tails is installed on USB drive "install" 18.111

But there is no persistence partition on USB drive "install" 0.094

Hooks

After features/support/hooks.rb:305 1.738

After features/support/hooks.rb:89 0.116

Tags: @product

3:40.860

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.144

And I temporarily create a 7200 MiB disk named "install" 0.054

And I plug USB drive "install" 2.457

And I install Tails to USB drive "install" by cloning 3:15.936

Then the running Tails is installed on USB drive "install" 13.184

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:305 1.394

After features/support/hooks.rb:89 0.135

Tags: @product

4:58.043

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 18.468

And I create a file in the Persistent directory 0.088

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 6.518

And I plug USB drive "install" 3.082

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:9.215

Then the running Tails is installed on USB drive "install" 16.975

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 3.566

Hooks

After features/support/hooks.rb:305 1.985

After features/support/hooks.rb:89 0.130

Tags: @product

3:53.632

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 17.330

And I temporarily create a 7200 MiB disk named "install" 0.060

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:16.807

Then the running Tails is installed on USB drive "install" 16.920

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:305 1.763

After features/support/hooks.rb:89 0.095

Tags: @product

3:54.281

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.187

And I have started Tails from DVD without network and logged in 12.252

And I clone USB drive "__internal" to a temporary USB drive "install" 1.094

And I plug USB drive "install" 2.489

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:16.086

Then the running Tails is installed on USB drive "install" 13.101

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:305 1.196

After features/support/hooks.rb:89 0.122

Tags: @product @uefi

1:51.087

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.863

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:35.529

Then Tails is running from USB drive "__internal" 0.395

And the boot device has safe access rights 2.893

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:305 0.555

After features/support/hooks.rb:89 0.005

Tags: @product

1:36.511

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.158

And I plug and mount a USB drive containing a Tails USB image 40.647

And I create a 7200 MiB disk named "usbimage" 0.056

And I plug USB drive "usbimage" 2.418

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.231

Hooks

After features/support/hooks.rb:305 2.335

After features/support/hooks.rb:89 0.090

Tags: @product

1:24.499

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given a computer 0.302

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:23.184

Then Tails is running from USB drive "usbimage" 0.299

And the label of the system partition on "usbimage" is "Tails" 0.200

And the system partition on "usbimage" is an EFI system partition 0.139

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.136

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.085

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.076

And the system partition on "usbimage" has the expected flags 0.073

Hooks

After features/support/hooks.rb:305 0.655

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:1.503	Passed

Feature Report