Cucumber Reports (no 4823) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4823	02 May 2024, 13:24

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:53.868	Passed

Tags: @product @not_release_blocker

25.364

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.196

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.209

And I plug USB drive "gptfat" 2.578

When I start Tails Installer 8.270

Then I am told by Tails Installer that the destination device "is too small" 0.059

Hooks

After features/support/hooks.rb:305 0.738

After features/support/hooks.rb:89 0.001

Tags: @product

20.081

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.032

And I temporarily create a 7200 MiB disk named "temp" 0.039

And I start Tails Installer 9.063

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.639

Then the "temp" USB drive is selected 0.077

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:305 1.371

After features/support/hooks.rb:89 0.000

Tags: @product

4:29.260

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.049

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 6.411

And I plug USB drive "install" 2.526

And I install Tails to USB drive "install" by cloning 3:59.504

Then the running Tails is installed on USB drive "install" 12.618

But there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:305 1.371

After features/support/hooks.rb:89 0.126

Tags: @product

4:33.424

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.445

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.622

And I install Tails to USB drive "install" by cloning 4:7.464

Then the running Tails is installed on USB drive "install" 14.759

But there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:305 1.209

After features/support/hooks.rb:89 0.150

Tags: @product

5:11.707

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 31.054

And I create a file in the Persistent directory 0.123

And I temporarily create a 7200 MiB disk named "install" 0.066

And I create a gpt partition with a vfat filesystem on disk "install" 6.877

And I plug USB drive "install" 2.588

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:9.781

Then the running Tails is installed on USB drive "install" 17.782

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 3.365

Hooks

After features/support/hooks.rb:305 2.225

After features/support/hooks.rb:89 0.130

Tags: @product

4:32.750

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 40.161

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.536

And I install Tails to USB drive "install" by cloning 3:21.602

Then the running Tails is installed on USB drive "install" 28.270

And there is no persistence partition on USB drive "install" 0.123

Hooks

After features/support/hooks.rb:305 2.300

After features/support/hooks.rb:89 0.141

Tags: @product

4:1.804

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.654

And I have started Tails from DVD without network and logged in 9.330

And I clone USB drive "__internal" to a temporary USB drive "install" 1.389

And I plug USB drive "install" 2.692

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:24.645

Then the running Tails is installed on USB drive "install" 13.027

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:305 1.410

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

2:8.948

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.633

And I power off the computer 0.326

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:50.433

Then Tails is running from USB drive "__internal" 0.371

And the boot device has safe access rights 3.110

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:305 0.620

After features/support/hooks.rb:89 0.006

Tags: @product

1:35.126

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.252

And I plug and mount a USB drive containing a Tails USB image 39.909

And I create a 7200 MiB disk named "usbimage" 0.087

And I plug USB drive "usbimage" 2.433

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.443

Hooks

After features/support/hooks.rb:305 1.602

After features/support/hooks.rb:89 0.098

Tags: @product

1:35.401

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.149

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:34.104

Then Tails is running from USB drive "usbimage" 0.368

And the label of the system partition on "usbimage" is "Tails" 0.219

And the system partition on "usbimage" is an EFI system partition 0.154

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.144

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.102

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:305 0.696

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:53.868	Passed

Feature Report