Cucumber Reports (no 4825) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4825	03 May 2024, 12:31

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:24.831	Passed

Tags: @product @not_release_blocker

25.960

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.079

And I temporarily create a 4 GiB disk named "gptfat" 0.054

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.384

And I plug USB drive "gptfat" 2.467

When I start Tails Installer 8.920

Then I am told by Tails Installer that the destination device "is too small" 0.053

Hooks

After features/support/hooks.rb:305 0.713

After features/support/hooks.rb:89 0.001

Tags: @product

20.968

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.243

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 9.403

But a suitable USB device is not found 0.030

When I plug USB drive "temp" 2.938

Then the "temp" USB drive is selected 0.085

When I unplug USB drive "temp" 0.190

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:305 0.674

After features/support/hooks.rb:89 0.000

Tags: @product

4:38.218

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails from DVD without network and logged in 10.397

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 6.427

And I plug USB drive "install" 2.517

And I install Tails to USB drive "install" by cloning 4:5.733

Then the running Tails is installed on USB drive "install" 13.013

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.137

After features/support/hooks.rb:89 0.114

Tags: @product

4:27.489

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.755

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 4.482

And I install Tails to USB drive "install" by cloning 4:0.447

Then the running Tails is installed on USB drive "install" 12.683

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:305 1.063

After features/support/hooks.rb:89 0.145

Tags: @product

5:3.555

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 49.338

And I create a file in the Persistent directory 0.089

And I temporarily create a 7200 MiB disk named "install" 0.113

And I create a gpt partition with a vfat filesystem on disk "install" 6.404

And I plug USB drive "install" 2.572

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:44.764

Then the running Tails is installed on USB drive "install" 15.140

And there is a persistence partition on USB drive "install" 0.075

And the USB drive "install" contains the same files as my persistent storage 5.056

Hooks

After features/support/hooks.rb:305 1.964

After features/support/hooks.rb:89 0.120

Tags: @product

3:49.524

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.137

And I temporarily create a 7200 MiB disk named "install" 0.039

And I plug USB drive "install" 2.473

And I install Tails to USB drive "install" by cloning 3:16.336

Then the running Tails is installed on USB drive "install" 18.474

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:305 2.004

After features/support/hooks.rb:89 0.123

Tags: @product

3:48.140

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.235

And I have started Tails from DVD without network and logged in 8.633

And I clone USB drive "__internal" to a temporary USB drive "install" 1.179

And I plug USB drive "install" 2.686

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.518

Then the running Tails is installed on USB drive "install" 11.824

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:305 1.070

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

1:50.257

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.363

And I power off the computer 0.328

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:35.394

Then Tails is running from USB drive "__internal" 0.292

And the boot device has safe access rights 2.797

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:305 1.155

After features/support/hooks.rb:89 0.056

Tags: @product

1:37.007

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.001

Steps

Given I have started Tails from DVD without network and logged in 8.080

And I plug and mount a USB drive containing a Tails USB image 40.298

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.397

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 46.185

Hooks

After features/support/hooks.rb:305 1.511

After features/support/hooks.rb:89 0.091

Tags: @product

1:23.708

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.147

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:22.435

Then Tails is running from USB drive "usbimage" 0.321

And the label of the system partition on "usbimage" is "Tails" 0.245

And the system partition on "usbimage" is an EFI system partition 0.147

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.138

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.098

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:305 0.672

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:24.831	Passed

Feature Report