And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.746
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.527
And
I accept adding "cowsay" to Additional Software
6.767
And
Additional Software is correctly configured for package "cowsay"
0.832
And
I shutdown Tails and wait for the computer to power off
6.273
And
I start Tails from USB drive "__internal" with network unplugged
57.874
And
I enable persistence
11.195
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
36.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.566
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.033
And
all notifications have disappeared
9.489
And
available upgrades have been checked
0.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.167
And
I can open the Additional Software configuration window from the notification
3.863
And
I shutdown Tails and wait for the computer to power off
13.325
And
I start Tails from USB drive "__internal" with network unplugged
57.306
And
I enable persistence
10.616
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
35.390
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078