Cucumber Reports (no 4829) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4829	06 May 2024, 15:08

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:47.393	Passed

Tags: @product @not_release_blocker

26.556

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.345

And I temporarily create a 4 GiB disk named "gptfat" 0.080

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.365

And I plug USB drive "gptfat" 2.608

When I start Tails Installer 9.100

Then I am told by Tails Installer that the destination device "is too small" 0.056

Hooks

After features/support/hooks.rb:305 1.749

After features/support/hooks.rb:89 0.001

Tags: @product

22.941

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.653

And I temporarily create a 7200 MiB disk named "temp" 0.056

And I start Tails Installer 10.178

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.722

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.039

Hooks

After features/support/hooks.rb:305 1.868

After features/support/hooks.rb:89 0.000

Tags: @product

4:12.713

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.293

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 6.395

And I plug USB drive "install" 2.528

And I install Tails to USB drive "install" by cloning 3:41.968

Then the running Tails is installed on USB drive "install" 13.418

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:305 1.081

After features/support/hooks.rb:89 0.114

Tags: @product

3:44.351

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.191

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 4.150

And I install Tails to USB drive "install" by cloning 3:18.846

Then the running Tails is installed on USB drive "install" 13.027

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:305 1.524

After features/support/hooks.rb:89 0.119

Tags: @product

4:34.617

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.142

And I create a file in the Persistent directory 0.209

And I temporarily create a 7200 MiB disk named "install" 0.055

And I create a gpt partition with a vfat filesystem on disk "install" 6.344

And I plug USB drive "install" 2.552

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.036

Then the running Tails is installed on USB drive "install" 15.884

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.328

Hooks

After features/support/hooks.rb:305 2.174

After features/support/hooks.rb:89 0.125

Tags: @product

4:5.802

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.821

And I temporarily create a 7200 MiB disk named "install" 0.059

And I plug USB drive "install" 2.507

And I install Tails to USB drive "install" by cloning 3:20.404

Then the running Tails is installed on USB drive "install" 27.940

And there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:305 1.503

After features/support/hooks.rb:89 0.103

Tags: @product

3:57.145

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.890

And I have started Tails from DVD without network and logged in 8.955

And I clone USB drive "__internal" to a temporary USB drive "install" 1.042

And I plug USB drive "install" 2.618

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:19.722

Then the running Tails is installed on USB drive "install" 13.844

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:305 1.500

After features/support/hooks.rb:89 0.127

Tags: @product @uefi

2:5.974

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 18.464

And I power off the computer 0.353

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:43.478

Then Tails is running from USB drive "__internal" 0.382

And the boot device has safe access rights 3.214

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:305 1.811

After features/support/hooks.rb:89 0.007

Tags: @product

1:46.333

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.189

And I plug and mount a USB drive containing a Tails USB image 41.361

And I create a 7200 MiB disk named "usbimage" 0.059

And I plug USB drive "usbimage" 2.424

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.297

Hooks

After features/support/hooks.rb:305 2.081

After features/support/hooks.rb:89 0.117

Tags: @product

1:30.957

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.165

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:29.618

Then Tails is running from USB drive "usbimage" 0.396

And the label of the system partition on "usbimage" is "Tails" 0.220

And the system partition on "usbimage" is an EFI system partition 0.153

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.146

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.087

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.085

And the system partition on "usbimage" has the expected flags 0.084

Hooks

After features/support/hooks.rb:305 0.631

After features/support/hooks.rb:89 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:47.393	Passed

Feature Report