Cucumber Reports (no 4831) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4831	07 May 2024, 12:22

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:52.695	Passed

Tags: @product @not_release_blocker

28.531

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.385

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.375

And I plug USB drive "gptfat" 3.634

When I start Tails Installer 9.021

Then I am told by Tails Installer that the destination device "is too small" 0.063

Hooks

After features/support/hooks.rb:305 1.659

After features/support/hooks.rb:89 0.001

Tags: @product

19.823

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.507

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 8.340

But a suitable USB device is not found 0.031

When I plug USB drive "temp" 2.573

Then the "temp" USB drive is selected 0.094

When I unplug USB drive "temp" 0.203

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:305 0.933

After features/support/hooks.rb:89 0.000

Tags: @product

3:55.182

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.641

And I temporarily create a 7200 MiB disk named "install" 0.083

And I create a gpt partition with a vfat filesystem on disk "install" 6.474

And I plug USB drive "install" 2.634

And I install Tails to USB drive "install" by cloning 3:21.742

Then the running Tails is installed on USB drive "install" 14.516

But there is no persistence partition on USB drive "install" 0.088

Hooks

After features/support/hooks.rb:305 1.299

After features/support/hooks.rb:89 0.131

Tags: @product

3:44.995

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.439

And I temporarily create a 7200 MiB disk named "install" 0.065

And I plug USB drive "install" 2.530

And I install Tails to USB drive "install" by cloning 3:21.112

Then the running Tails is installed on USB drive "install" 12.772

But there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:305 1.244

After features/support/hooks.rb:89 0.115

Tags: @product

4:54.740

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.736

And I create a file in the Persistent directory 0.109

And I temporarily create a 7200 MiB disk named "install" 0.058

And I create a gpt partition with a vfat filesystem on disk "install" 6.589

And I plug USB drive "install" 2.791

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:7.568

Then the running Tails is installed on USB drive "install" 16.461

And there is a persistence partition on USB drive "install" 0.069

And the USB drive "install" contains the same files as my persistent storage 6.355

Hooks

After features/support/hooks.rb:305 1.969

After features/support/hooks.rb:89 0.132

Tags: @product

4:5.513

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.941

And I temporarily create a 7200 MiB disk named "install" 0.052

And I plug USB drive "install" 2.481

And I install Tails to USB drive "install" by cloning 3:20.817

Then the running Tails is installed on USB drive "install" 26.142

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:305 1.549

After features/support/hooks.rb:89 0.093

Tags: @product

3:59.814

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.164

And I have started Tails from DVD without network and logged in 9.847

And I clone USB drive "__internal" to a temporary USB drive "install" 1.427

And I plug USB drive "install" 3.697

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:20.418

Then the running Tails is installed on USB drive "install" 13.190

And there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:305 1.725

After features/support/hooks.rb:89 0.124

Tags: @product @uefi

2:8.431

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.033

And I power off the computer 0.326

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:52.363

Then Tails is running from USB drive "__internal" 0.403

And the boot device has safe access rights 3.214

And Tails has started in UEFI mode 0.062

Hooks

After features/support/hooks.rb:305 0.671

After features/support/hooks.rb:89 0.005

Tags: @product

1:43.773

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.681

And I plug and mount a USB drive containing a Tails USB image 40.721

And I create a 7200 MiB disk named "usbimage" 0.077

And I plug USB drive "usbimage" 2.430

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.862

Hooks

After features/support/hooks.rb:305 2.820

After features/support/hooks.rb:89 0.092

Tags: @product

1:31.890

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.166

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:30.523

Then Tails is running from USB drive "usbimage" 0.353

And the label of the system partition on "usbimage" is "Tails" 0.249

And the system partition on "usbimage" is an EFI system partition 0.166

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.164

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.083

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.080

And the system partition on "usbimage" has the expected flags 0.102

Hooks

After features/support/hooks.rb:305 0.862

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:52.695	Passed

Feature Report