Cucumber Reports (no 4832) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4832	08 May 2024, 12:47

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.012	Passed

Tags: @product @not_release_blocker

31.669

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.335

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 11.369

And I plug USB drive "gptfat" 2.856

When I start Tails Installer 9.003

Then I am told by Tails Installer that the destination device "is too small" 0.055

Hooks

After features/support/hooks.rb:305 1.734

After features/support/hooks.rb:89 0.001

Tags: @product

21.864

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.470

And I temporarily create a 7200 MiB disk named "temp" 0.041

And I start Tails Installer 9.200

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.802

Then the "temp" USB drive is selected 0.124

When I unplug USB drive "temp" 0.177

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:305 0.855

After features/support/hooks.rb:89 0.000

Tags: @product

3:50.938

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.277

And I temporarily create a 7200 MiB disk named "install" 0.076

And I create a gpt partition with a vfat filesystem on disk "install" 6.386

And I plug USB drive "install" 2.694

And I install Tails to USB drive "install" by cloning 3:19.677

Then the running Tails is installed on USB drive "install" 13.758

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:305 1.263

After features/support/hooks.rb:89 0.112

Tags: @product

3:47.802

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 11.263

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.799

And I install Tails to USB drive "install" by cloning 3:19.788

Then the running Tails is installed on USB drive "install" 13.800

But there is no persistence partition on USB drive "install" 0.105

Hooks

After features/support/hooks.rb:305 1.389

After features/support/hooks.rb:89 0.127

Tags: @product

4:36.335

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.660

And I create a file in the Persistent directory 0.118

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 6.576

And I plug USB drive "install" 2.550

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.538

Then the running Tails is installed on USB drive "install" 16.333

And there is a persistence partition on USB drive "install" 0.062

And the USB drive "install" contains the same files as my persistent storage 3.449

Hooks

After features/support/hooks.rb:305 2.190

After features/support/hooks.rb:89 0.138

Tags: @product

4:0.149

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.338

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 2.525

And I install Tails to USB drive "install" by cloning 3:23.689

Then the running Tails is installed on USB drive "install" 18.422

And there is no persistence partition on USB drive "install" 0.126

Hooks

After features/support/hooks.rb:305 1.982

After features/support/hooks.rb:89 0.116

Tags: @product

3:54.842

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.600

And I have started Tails from DVD without network and logged in 9.009

And I clone USB drive "__internal" to a temporary USB drive "install" 1.372

And I plug USB drive "install" 2.748

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:16.838

Then the running Tails is installed on USB drive "install" 14.209

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:305 1.308

After features/support/hooks.rb:89 0.164

Tags: @product @uefi

2:9.429

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.020

And I power off the computer 0.345

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:53.406

Then Tails is running from USB drive "__internal" 0.345

And the boot device has safe access rights 3.235

And Tails has started in UEFI mode 0.049

Hooks

After features/support/hooks.rb:305 0.611

After features/support/hooks.rb:89 0.005

Tags: @product

1:44.191

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.619

And I plug and mount a USB drive containing a Tails USB image 44.864

And I create a 7200 MiB disk named "usbimage" 0.054

And I plug USB drive "usbimage" 2.415

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 48.237

Hooks

After features/support/hooks.rb:305 2.128

After features/support/hooks.rb:89 0.095

Tags: @product

1:27.788

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.169

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:26.440

Then Tails is running from USB drive "usbimage" 0.335

And the label of the system partition on "usbimage" is "Tails" 0.220

And the system partition on "usbimage" is an EFI system partition 0.199

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.167

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.087

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.096

And the system partition on "usbimage" has the expected flags 0.071

Hooks

After features/support/hooks.rb:305 1.266

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.012	Passed

Feature Report