Cucumber Reports (no 4843) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4843	15 May 2024, 18:44

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:2.403	Passed

Tags: @product @not_release_blocker

26.509

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.544

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.595

And I plug USB drive "gptfat" 2.526

When I start Tails Installer 8.752

Then I am told by Tails Installer that the destination device "is too small" 0.042

Hooks

After features/support/hooks.rb:305 0.773

After features/support/hooks.rb:89 0.001

Tags: @product

20.590

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.330

And I temporarily create a 7200 MiB disk named "temp" 0.059

And I start Tails Installer 9.020

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.855

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.029

Hooks

After features/support/hooks.rb:305 0.813

After features/support/hooks.rb:89 0.000

Tags: @product

3:54.865

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.059

And I temporarily create a 7200 MiB disk named "install" 0.656

And I create a gpt partition with a vfat filesystem on disk "install" 6.702

And I plug USB drive "install" 3.047

And I install Tails to USB drive "install" by cloning 3:23.543

Then the running Tails is installed on USB drive "install" 12.783

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:305 1.091

After features/support/hooks.rb:89 0.118

Tags: @product

3:40.744

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.325

And I temporarily create a 7200 MiB disk named "install" 0.053

And I plug USB drive "install" 3.796

And I install Tails to USB drive "install" by cloning 3:16.130

Then the running Tails is installed on USB drive "install" 12.372

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:305 1.052

After features/support/hooks.rb:89 0.114

Tags: @product

4:28.486

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.895

And I create a file in the Persistent directory 0.135

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 6.365

And I plug USB drive "install" 2.997

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.929

Then the running Tails is installed on USB drive "install" 18.005

And there is a persistence partition on USB drive "install" 0.099

And the USB drive "install" contains the same files as my persistent storage 6.999

Hooks

After features/support/hooks.rb:305 2.758

After features/support/hooks.rb:89 0.137

Tags: @product

3:54.833

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.346

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.551

And I install Tails to USB drive "install" by cloning 3:20.151

Then the running Tails is installed on USB drive "install" 20.627

And there is no persistence partition on USB drive "install" 0.110

Hooks

After features/support/hooks.rb:305 2.242

After features/support/hooks.rb:89 0.099

Tags: @product

3:53.599

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.043

And I have started Tails from DVD without network and logged in 9.019

And I clone USB drive "__internal" to a temporary USB drive "install" 1.303

And I plug USB drive "install" 2.539

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:16.752

Then the running Tails is installed on USB drive "install" 13.823

And there is no persistence partition on USB drive "install" 0.117

Hooks

After features/support/hooks.rb:305 1.361

After features/support/hooks.rb:89 0.134

Tags: @product @uefi

1:56.190

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.650

And I power off the computer 0.371

And the computer is set to boot in UEFI mode 0.034

When I start Tails from USB drive "__internal" with network unplugged and I login 1:40.884

Then Tails is running from USB drive "__internal" 0.365

And the boot device has safe access rights 2.838

And Tails has started in UEFI mode 0.046

Hooks

After features/support/hooks.rb:305 0.865

After features/support/hooks.rb:89 0.005

Tags: @product

1:52.883

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.091

And I plug and mount a USB drive containing a Tails USB image 41.046

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.423

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:1.278

Hooks

After features/support/hooks.rb:305 2.652

After features/support/hooks.rb:89 0.091

Tags: @product

1:33.700

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.163

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:32.278

Then Tails is running from USB drive "usbimage" 0.376

And the label of the system partition on "usbimage" is "Tails" 0.238

And the system partition on "usbimage" is an EFI system partition 0.164

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.191

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.095

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.101

And the system partition on "usbimage" has the expected flags 0.091

Hooks

After features/support/hooks.rb:305 1.550

After features/support/hooks.rb:89 0.009

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:2.403	Passed

Feature Report