Cucumber Reports (no 4849) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4849	20 May 2024, 13:03

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.875	Passed

Tags: @product @not_release_blocker

26.631

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.611

And I temporarily create a 4 GiB disk named "gptfat" 0.078

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.339

And I plug USB drive "gptfat" 2.593

When I start Tails Installer 8.965

Then I am told by Tails Installer that the destination device "is too small" 0.043

Hooks

After features/support/hooks.rb:305 0.839

After features/support/hooks.rb:89 0.001

Tags: @product

21.620

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.655

And I temporarily create a 7200 MiB disk named "temp" 0.066

And I start Tails Installer 9.555

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.988

Then the "temp" USB drive is selected 0.089

When I unplug USB drive "temp" 0.217

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:305 1.867

After features/support/hooks.rb:89 0.000

Tags: @product

3:52.258

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.195

And I temporarily create a 7200 MiB disk named "install" 0.053

And I create a gpt partition with a vfat filesystem on disk "install" 6.420

And I plug USB drive "install" 2.596

And I install Tails to USB drive "install" by cloning 3:20.153

Then the running Tails is installed on USB drive "install" 14.771

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:305 1.427

After features/support/hooks.rb:89 0.151

Tags: @product

3:43.137

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.357

And I temporarily create a 7200 MiB disk named "install" 0.085

And I plug USB drive "install" 2.622

And I install Tails to USB drive "install" by cloning 3:17.374

Then the running Tails is installed on USB drive "install" 14.620

But there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:305 1.401

After features/support/hooks.rb:89 0.154

Tags: @product

4:29.038

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 18.245

And I create a file in the Persistent directory 0.240

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 6.389

And I plug USB drive "install" 2.680

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.473

Then the running Tails is installed on USB drive "install" 16.019

And there is a persistence partition on USB drive "install" 0.085

And the USB drive "install" contains the same files as my persistent storage 3.845

Hooks

After features/support/hooks.rb:305 2.425

After features/support/hooks.rb:89 0.134

Tags: @product

4:2.801

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.780

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.506

And I install Tails to USB drive "install" by cloning 3:25.963

Then the running Tails is installed on USB drive "install" 21.407

And there is no persistence partition on USB drive "install" 0.095

Hooks

After features/support/hooks.rb:305 2.687

After features/support/hooks.rb:89 0.091

Tags: @product

3:57.414

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.773

And I have started Tails from DVD without network and logged in 8.671

And I clone USB drive "__internal" to a temporary USB drive "install" 1.384

And I plug USB drive "install" 3.639

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:18.436

Then the running Tails is installed on USB drive "install" 15.442

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:305 1.398

After features/support/hooks.rb:89 0.126

Tags: @product @uefi

2:15.651

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.010

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.447

And I power off the computer 0.338

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:58.348

Then Tails is running from USB drive "__internal" 0.343

And the boot device has safe access rights 3.064

And Tails has started in UEFI mode 0.076

Hooks

After features/support/hooks.rb:305 1.006

After features/support/hooks.rb:89 0.006

Tags: @product

1:47.141

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.318

And I plug and mount a USB drive containing a Tails USB image 43.521

And I create a 7200 MiB disk named "usbimage" 0.057

And I plug USB drive "usbimage" 2.438

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.806

Hooks

After features/support/hooks.rb:305 2.493

After features/support/hooks.rb:89 0.094

Tags: @product

1:30.179

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.202

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.621

Then Tails is running from USB drive "usbimage" 0.340

And the label of the system partition on "usbimage" is "Tails" 0.239

And the system partition on "usbimage" is an EFI system partition 0.165

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.208

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.213

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.095

And the system partition on "usbimage" has the expected flags 0.092

Hooks

After features/support/hooks.rb:305 0.722

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.875	Passed

Feature Report