And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.757
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.277
And
I accept adding "cowsay" to Additional Software
4.341
And
Additional Software is correctly configured for package "cowsay"
0.905
And
I shutdown Tails and wait for the computer to power off
6.615
And
I start Tails from USB drive "__internal" with network unplugged
59.464
And
I enable persistence
14.966
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
37.844
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.409
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.037
And
all notifications have disappeared
7.503
And
available upgrades have been checked
0.184
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.823
And
I can open the Additional Software configuration window from the notification
4.190
And
I shutdown Tails and wait for the computer to power off
13.150
And
I start Tails from USB drive "__internal" with network unplugged
58.977
And
I enable persistence
12.793
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.403
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.789
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.048
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082