And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.051
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.497
And
I accept adding "cowsay" to Additional Software
6.852
And
Additional Software is correctly configured for package "cowsay"
0.848
And
I shutdown Tails and wait for the computer to power off
6.301
And
I start Tails from USB drive "__internal" with network unplugged
57.163
And
I enable persistence
13.859
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.922
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.939
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.086
And
all notifications have disappeared
7.082
And
available upgrades have been checked
0.229
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.403
And
I can open the Additional Software configuration window from the notification
3.151
And
I shutdown Tails and wait for the computer to power off
13.171
And
I start Tails from USB drive "__internal" with network unplugged
58.969
And
I enable persistence
11.805
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
36.823
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.621
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094